It has a steel tilt front end. If you look at the lower fender, where the patch panel ends, that's where it separates.
Here are a few more shots:
http://www.picturetrail.com/sfx/album/view/9061384
Mark
----- Original Message -----
From: "Jimmy Peavy" <peaver63@xxxxxxxxxxxxxx>
To: 1962to1965mopars@xxxxxxxxxxxxxxxx
Sent: Monday, June 13, 2011 9:31:48 PM
Subject: Re: track width for A110 VANS
You just very rarely see a 64 Dodge 440 sedan.
I'm not sure that everyone is aware that the trim is exactly the
same a a 63 Polara 500 , from the rear forward, with the exception
of the rearward facing spear on the front fender.
I'd love to own this car.
Thanks for the shot.
Jimmy
On 6/13/2011 8:18 PM,
chymar01@xxxxxxxxxxx wrote:
--
You received this message because you are subscribed to the Google
Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To post to this group, send email to
1962to1965mopars@xxxxxxxxxxxxxxxx.
To unsubscribe from this group, send email to
1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit this group at
http://groups.google.com/group/1962to1965mopars?hl=en.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To post to this group, send email to 1962to1965mopars@xxxxxxxxxxxxxxxxx
To unsubscribe from this group, send email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx
For more options, visit this group at http://groups.google.com/group/1962to1965mopars?hl=en.