Here ya go Neal.
He used the stock 64 steering box and pitman mounted to what was left of
the original k-frame after he chopped it way down. Rear mounting was a
tube thru the frame like in the Mopar Performance spring relocating kit.
The front mount is just welded to the frame. I'd add gussets for a
better install. The truck steering arm was heated and bent around to
where he could use a tie rod to connect it to the pitman arm. The shocks
were just mounted with a tab.
Mark
----- Original Message -----
From: "neal zimmerman" <neal.zimmerman@xxxxxxxxx>
To: 1962to1965mopars@xxxxxxxxxxxxxxxx
Sent: Monday, June 13, 2011 9:42:39 PM
Subject: Re: track width for A110 VANS
yeah!! Some pics underneath and how the steering is hooked in would be
awesome. Did he use the 64 dodge polara steering box? Pitmann arm?
neal
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To post to this group, send email to 1962to1965mopars@xxxxxxxxxxxxxxxxx
To unsubscribe from this group, send email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx
For more options, visit this group at http://groups.google.com/group/1962to1965mopars?hl=en.
Back to the Home of the Forward Look Network