Re: Milling heads

[MO <micher@xxxxxxxxxxxxxxx>]

Thanks Dodger, I am really bad with thousandths.  I had heard that
intake side of head should be milled  2/3 of what the deck side of the
head is milled.  Is that comparable with your formula ?

And what 65 Darwin says--That is an issue I had not thought of . Even
tho the intake surfaces are at the correct angle, will it mis align
the bolt holes and port match????  I can't quite get my foggy brain
around that.

Don D. said with stock 1978 passrmger car 440 heads (8.2 C.R. ?)  that
60 thou. milling would wake that engine up. What he did not say was
what the comp ratio would be or what else would need to be done to
make it all fit together correctly.  I am kinda thinking about a 30-40
thous. milling.

Any other input is welcome.....Thamks....................MO

On Jul 11, 7:57 am, Dodger7...@xxxxxxx wrote:
> Mo,,,,,,, if memory serves,,,, this is  the correct formula, am sure  that
> the machine shop that does the milling will know for sure, and as I recall  
> you can go up to  about .060 before causing push rod problems
>
> mill the intake surface of the head 0.0095 inches for every 0.010 you take  
> from the deck/head surface.
>
> In a message dated 7/11/2011 12:10:07 A.M. Central Daylight Time,  
>
> mic...@xxxxxxxxxxxxxxx writes:
>
> i HEAR  THAT WHEN MILLING HEADS, YOU CAM ALSO MILL THE INTAKE MANIFOLD
> SIDE OF THE  HEAD TO CORRECT

-- 
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.