Hose on part right before rad...but they never leaked before...maybe I should tighten them...and tighten where they go into rad.
Sent from my iPhone Sometimes when you push the hose to far on they will leak. Have the hose about 1/8 to 1/4 in from the bend then tighten with a good hose clamp and see if that dosen't help. The rad does it have metal lines all the way or a hose on part of it.?
On Sat, Aug 6, 2011 at 6:58 PM, Jacob Fox <imfast101@xxxxxxxxx> wrote:
It's not the high pressure line with the fitting...it's just the return hose with the hose clamps...I'm doing this by myself so I can't turn the wheel and watch the pump to see where it's coming from...the part by the hose is real wet so I figure it's coming out the hose. Ima try and push it down further passed the bend and put 2 hose clamps maybe....ugh I hate leaks with a passion...now I noticed a drop of tranny fluid by my radiator...when will it end!?!?! :(
Sent from my iPhone Did you put teflon tape on the fitting before you installed it.?? On Sat, Aug 6, 2011 at 2:47 PM, Jacob Fox <imfast101@xxxxxxxxx> wrote:
I've been dealing with a super aggravating leak on my power steering. The low pressure line that runs to the box was leaking on both sides. Replaced hose, hose clamped it back...filled fluid...took a drive and the leak stopped on one end but where it connects to pump is still leaking bad....I just can't get it to stop. I think it's coming out as I'm driving an getting on frame making me think I have a oil pan leak. Any suggestions? I don't wanna burn up my box or pump...just can't enjoy the damn thing lol
Sent from my iPhone
--
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
-- Gwwilson
--
-- Gwwilson
--
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
--
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
|
Back to the Home of the Forward Look Network