|
My wife and I always drive the 64 Polara to Heath to the cruise in on Friday nite during the Nats, but this year we
-- were SORELY disappointed. Every MORON from everwhere showed up to burn their tires and raise hell this year. I don't think a third of the cars were Mopars. There were rusty old junkers, 4x4's, and Mom's Buick smoking the tires and stinking the area up. I don't blame the Mopar owners for not wanting some A-hole sliding his POS into the side of the car he just spent hours and countless $$$ restoring either. I wouldn't be surprised if the cops shut the whole thing down for next year. I won't go back there again. It's always been you could spin your tires a couple times and the cops didn't car, but these idiots were doing long smoky burnouts 5 feet from the crowd. Never fails, every time you find something good, someone has to come along to screw it up! Jeff To: 1962to1965mopars+digest@xxxxxxxxxxxxxxxx From: 1962to1965mopars+noreply@xxxxxxxxxxxxxxxx Subject: Digest for 1962to1965mopars@xxxxxxxxxxxxxxxx - 25 Messages in 12 Topics Date: Mon, 15 Aug 2011 00:24:56 +0000 Group: http://groups.google.com/group/1962to1965mopars/topics
Topic: Dash Pad
You'll probably have to get lucky and find a good used or NOS one and get it sprayed the color you need. Restoring these is labor intensive, e.g, see http://www.automedia.com/Dash_Pad_Restoration/res20000718dp/1 You may be able to use a generic style cover. http://www.dashmat.com/ for example. Thanks, Gary H.
While the unit was down I did a massive search for Mopar junk yards. Found a bunch and sent a email to all of them looking for the different things I need. Hopefully somewhere there's a dash pad and emblem!! Gotta be!! Wish me luck! Sent from my iPhone
Good luck. :) BTW, there are a bunch of 62-65 Mopar junk yards listed on the vendor's page on the Web site. Thanks, Gary H.
Welcome to the 1962 to 1965 Mopar Mail List Clubhouse to Andrew! Below is Andrew's introductory message. Thanks, Gary H. ====Introductory Message==== hi I am Andrew Barge. I have a 1964 4 door pillarless Plymouth fury with a 440 in it .I have taken to the strip a few times. best time was a 12.9. I am about to start a overhaul of the car and want to build into a max wedge clone and try and 11 seconds down the 1/4 mile. Topic: trunk emblem
anybody know/have a trunk emblem for my 880? its the triangle dodge emblem i believe that goes inside the silver disc that you turn when you open trunk. i guess it fell out over the years....cant find it anywheres on the net... -- Jacob Fox '64 Dodge Custom 880
What year and do you have a pic for reference? Date: Sun, 14 Aug 2011 13:25:03 -0500 Subject: trunk emblem From: imfast101@xxxxxxxxx To: 1962to1965mopars@xxxxxxxxxxxxxxxx anybody know/have a trunk emblem for my 880? its the triangle dodge emblem i believe that goes inside the silver disc that you turn when you open trunk. i guess it fell out over the years....cant find it anywheres on the net... -- Jacob Fox '64 Dodge Custom 880 -- -- Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! 1962 to 1965 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. -- You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group. http://groups.google.com/group/1962to1965mopars?hl=en.
1964. i guess this would be it. although i have seen another emblem. i just googled it.... hopefully the website i sent works... http://www.flickr.com/photos/13411027@N00/4564070901/ ill try to find other pics -- Jacob Fox '64 Dodge Custom 880
http://www.flickr.com/photos/13411027@N00/4564070901/ heres another picture....looks kinda different. I dont care which one really as long as i have one :) -- Jacob Fox '64 Dodge Custom 880
Ooooh, sorry man. If it was a 65 I could help you out. Date: Sun, 14 Aug 2011 14:15:22 -0500 Subject: Re: trunk emblem From: imfast101@xxxxxxxxx To: 1962to1965mopars@xxxxxxxxxxxxxxxx http://www.flickr.com/photos/13411027@N00/4564070901/ heres another picture....looks kinda different. I dont care which one really as long as i have one :) On Sun, Aug 14, 2011 at 2:14 PM, jacob fox <imfast101@xxxxxxxxx> wrote: 1964. i guess this would be it. although i have seen another emblem. i just googled it.... hopefully the website i sent works... http://www.flickr.com/photos/13411027@N00/4564070901/ ill try to find other pics On Sun, Aug 14, 2011 at 1:51 PM, Cory Rempel <cory_383@xxxxxxxxxxx> wrote: What year and do you have a pic for reference? Date: Sun, 14 Aug 2011 13:25:03 -0500 Subject: trunk emblem From: imfast101@xxxxxxxxx To: 1962to1965mopars@xxxxxxxxxxxxxxxx anybody know/have a trunk emblem for my 880? its the triangle dodge emblem i believe that goes inside the silver disc that you turn when you open trunk. i guess it fell out over the years....cant find it anywheres on the net... -- Jacob Fox '64 Dodge Custom 880 -- -- Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! 1962 to 1965 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. -- You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group. http://groups.google.com/group/1962to1965mopars?hl=en. -- -- Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! 1962 to 1965 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. -- You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group. http://groups.google.com/group/1962to1965mopars?hl=en. -- Jacob Fox '64 Dodge Custom 880 -- Jacob Fox '64 Dodge Custom 880 -- -- Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! 1962 to 1965 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. -- You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group. http://groups.google.com/group/1962to1965mopars?hl=en.
http://www.flickr.com/photos/hj75/5137222997/ sorry i coped twice :( -- Jacob Fox '64 Dodge Custom 880
no worries. id prolly have to change the whole trunk lock bezel. idk though. hopefully someone knows where i can aquire one. i lost my favorites there was a guy that had nothing but old mopars in a junk yard i had called a while back looking for my horn ring. I cant remember the website it was....but i dont think he had one. seems everybodys lookin for them things. -- Jacob Fox '64 Dodge Custom 880 Topic: Welcome New Member
Welcome to the 1962 to 1965 Mopar Mail List Clubhouse to Wayne! Below is Wayne's introductory message. Thanks, Gary H. ====Introductory Message==== I've owned a '62 plymouth,'64 plymouth,'65 plymouth and a '65 dodge.
Welcome Wayne! MoPar or No Car -----Original Message----- From: Gary H. Sent: Sunday, August 14, 2011 7:09 AM To: 1962to1965mopars@xxxxxxxxxxxxxxxx Subject: Welcome New Member Welcome to the 1962 to 1965 Mopar Mail List Clubhouse to Wayne! Below is Wayne's introductory message. Thanks, Gary H. ====Introductory Message==== I've owned a '62 plymouth,'64 plymouth,'65 plymouth and a '65 dodge. -- -- Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! 1962 to 1965 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. -- You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group. http://groups.google.com/group/1962to1965mopars?hl=en.
Below is a review of the latest addition to the 1962 to 1965 Mopar Swap Meet Page. Reminder: In the past I sent this "heads up" notice about the new ads to Clubhouse members as soon as I put the ads on the Swap Meet Page. Now I post the listings here first, then upload the ads to the Swap Meet Page a day or two *after* they get listed here. Thus Clubhouse members get a longer "first shot" at the listings as a membership perk. :) Use http://1962to1965mopar.ornocar.com/swapmeet2011.html to see the swap meet. Regards, Gary H. FOR SALE 318 Poly Intake Manifolds for Sale Cast Iron Four Barrel Poly 318 intake – excellent condition; tanked, bead blasted, painted – no corrosion and no cracks in heat crossover! Weiand WPD4D Aluminum 318 Poly Dual Quad intake – excellent condition; tanked, cleaned, bead blasted – no corrosion/no damage/no repairs...the most powerful production intake made. Contact Gary Pavlovich at glpavlovich AT cox.net Intakes are in Southern California – no problem with shipping anywhere. Thank you! Topic: The big Parade push
As you know my engine is setting on a stand waiting to be completed. Gary has sent the heads and they will arrive on Thursday. So my plan is to degree the cam tomorrow by using a lifter in place and using the ratio multiplier to verify lift. This will be a tad iffy since the ratio will most likely not be the full 1.5/1. My current rockers turned out to be 1.38/1. So I'll use 1.4/1 as a generic number. Then after setting the cam per specs the best I can I will complete the short block. I will then install everything possible back in the car. When the heads arrive I will complete the installation in the car. This will give me 1 or 1.5 days to have it ready for the Parade on Sat morning. Since the only changes are heads and valve train there will be no break in necessary except for the cam. I won't have much tuning time so I hope it'll co-operate for the Parade. If you want to really test your cooling system then drive in a parade. It is brutal. Chugging along at 2mph and extended stops in 80-100deg weather will push things to the limit. Wish me luck :-) -- Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies Topic: Header paint
Do you suppose my wife would notice a pair of headers stuck in the oven? It wouldn't be a first around here :-) I think I will just have to try the VHT. I have had great success with the 1200deg Dupli-color paint on the engine and components. I can only find the 500deg stuff now. As I recall my headers ran about 400ish deg.. I have to break in the new cam so it gets seniority over the headers. We'll see how the heat works out. Thanks for your input. Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies =================================================================================================================================== -- Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies
Rich, You have an oven big enough to fit a pair of headers. I'm coming to your house for Thanksgiving dinner..... Nick ----- Original Message ----- From: "Richard Kinsley" <leroar.kinsley058@xxxxxxxxx> To: 1962to1965mopars@xxxxxxxxxxxxxxxx Sent: Sunday, August 14, 2011 12:17:46 AM Subject: Re: Header paint Do you suppose my wife would notice a pair of headers stuck in the oven? It wouldn't be a first around here :-) I think I will just have to try the VHT. I have had great success with the 1200deg Dupli-color paint on the engine and components. I can only find the 500deg stuff now. As I recall my headers ran about 400ish deg.. I have to break in the new cam so it gets seniority over the headers. We'll see how the heat works out. Thanks for your input. Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies =================================================================================================================================== On Sat, Aug 13, 2011 at 11:42 AM, < furyus63@xxxxxxxxxxx > wrote: The only time I play doctor and prescribe medication is when I try it on myself and can show results. Very seldom will you hear me say I know a guy that did this or that. Success in any paint job is the preparation, we all know that. Our old engines retained their paint with an added protective layer of grease, oil and dirt. Times have changed, we car owners now for the most part keep our engine compartments and what's in them clean and shinny for cruising and shows. Back in the 60's we cruised everyday, sun, rain, snow, but never opened our hoods to show spectators. Engine paint has also changed with the times, no matter what color it is, it's now "enviro friendly green", as well as the primers they require, unlike the "Red Lead" we used in the Navy. I had been having a problem with my Max Wedge, the right valve cover started blistering next to the Max Wedge exhaust manifold. Unlike those who run headers I can't remove the valve cover without removing either the exhaust or intake manifold, also a plus with adjustable rocker arms when you need too...you know what. I've seen 383's & 440's all with HP exhaust manifolds also blister the paint on right side valve cover and the heat riser area of the intake manifold. All with the new and improved Mopar engine paint. I tried a repair with Dupli-Color 500F Ceramic Engine enamel, blistered the first day. A heat gun showed my exhaust manifolds to be 743F right side and 740F left. My cure was to us VHT Very High Temperature 1300-2000F Header Paint on my valve cover, first using matching primer after preping. I brushed painted the valve cover in place and also made .015 aluminum heat shield, no more problem. This paint works when cured as per instructions. Bake at 250F for 30 min. and let cool for 30 min. Bake at 400F for 30 min, let cool for 30 min. Bake at 600F for 30 min. and let cool. My bake temperature was the temperature coming off the exhaust manifold. With a heat gun the recipe was easy. BTW, I know a guy, LOL, there I've said it, that had his MW exhaust manifolds ceramic coated inside and out. Reduced heat and no paint blistering on his valve covers, I've seen it last for years. Nick Tiberio FuryUs63 From: furyus63@xxxxxxxxxxx To: 1962to1965mopars@xxxxxxxxxxxxxxxx Sent: Saturday, August 13, 2011 9:20:11 AM Subject: Re: Header paint Don, Good point, I meant the paint is good to 1200F, quote from the can "Resists Heat Up To 1,200F", photo attached. Nick Tiberio FuryUs63 From: "Donald Gallimore" < dongallimore@xxxxxxx > To: 1962to1965mopars@xxxxxxxxxxxxxxxx Sent: Saturday, August 13, 2011 8:20:24 AM Subject: Re: Header paint Did you put them in an "oven" to heat them to 1200 degrees or maybe you meant the paint is good to 1200? Akron Don Gallimore From: " furyus63@xxxxxxxxxxx " < furyus63@xxxxxxxxxxx > To: 1962to1965mopars@xxxxxxxxxxxxxxxx Sent: Fri, August 12, 2011 11:33:59 PM Subject: Re: Header paint Rich, My TTI headers were installed on my old engine in July 2005, and were c-coated from TTI as were yours. The headers had some scratches, stains etc. and were repainted and installed on the new engine in July 2010, driving the car since Sep. 2010 they look as good as the day I painted them. I used Eastwood Silver High Temp Coating Part #10175Z, heat up to 1200F. You know my engine, it works, that's it. Photo attached of painted headers upon installation. Nick Tiberio FuryUs63 From: "Richard Kinsley" < leroar.kinsley058@xxxxxxxxx > To: 1962to1965mopars@xxxxxxxxxxxxxxxx Sent: Friday, August 12, 2011 10:53:09 PM Subject: Re: Header paint Thanks Nick. Rich Kinsley On Fri, Aug 12, 2011 at 4:38 PM, < furyus63@xxxxxxxxxxx > wrote: Rich, When I get home tonight I'll give you the info on what I used to redo my TTI's for the Poly stroker. The paint is as good as it was a year and a half ago when I did them. Nick Tiberio FuryUs63 From: "Richard Kinsley" < leroar.kinsley058@xxxxxxxxx > To: 1962to1965mopars@xxxxxxxxxxxxxxxx Sent: Friday, August 12, 2011 4:03:44 PM Subject: Header paint My TTI's have taken quite a bit of abuse over the last 5 or so years. Besides being rubbed raw they are quite stained from misc oils and other fluids. I don't want to spend $250 to have them recoated and mainly the timing would be an issue. I already have lost all the season so far and don't want any more slow downs. I am planning to clean them as best I can with acetone and then use the VHT header paint in a similar silver color. I was thinking of the stainless steel paint I used on the intake and front cover but that stuff is three times as expensive as VHT and is rated at 400deg whereas the VHT is something like 1500deg.. I know header paint has always been an issue but I want something to work NOW and it can be redone on the next build in a couple years. Anybody with previous experience? -- Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies -- -- Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! 1962 to 1965 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html . -- You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group. http://groups.google.com/group/1962to1965mopars?hl=en . -- -- Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! 1962 to 1965 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html . -- You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group. http://groups.google.com/group/1962to1965mopars?hl=en . -- Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies -- -- Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! 1962 to 1965 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html . -- You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group. http://groups.google.com/group/1962to1965mopars?hl=en . -- -- Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! 1962 to 1965 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html . -- You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group. http://groups.google.com/group/1962to1965mopars?hl=en . -- -- Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! 1962 to 1965 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html . -- You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group. http://groups.google.com/group/1962to1965mopars?hl=en . -- -- Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! 1962 to 1965 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html . -- You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group. http://groups.google.com/group/1962to1965mopars?hl=en . -- -- Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! 1962 to 1965 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html . -- You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group. http://groups.google.com/group/1962to1965mopars?hl=en . -- Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies -- -- Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! 1962 to 1965 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html . -- You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group. http://groups.google.com/group/1962to1965mopars?hl=en .
I have a big roll of tin foil. I can build an extension :-) A few weeks ago I could've just set it in the driveway! Rich -- Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies Topic: Pot metal & (Aluminum?)
I paid $250 to have my center insert re-chromed. I am in the Seattle market so things tend to be more expensive here. I did the repainting myself. Difficult, but I learned a lot. Finding the paint is easy, the masking is the hard part.Mine looks very nice now! When I find another chrome frame I will have it re-chromed to finish it off. Doug '64 Sport Fury Topic: Mopar Related Head Question
I have a 1991 318 in a Dakota with a cracked head. Anyone have the interchange data on what year heads I can use? I have been doing Google searches and it looks like 91 may be the year heads changed and the 318 went to roller cam. Going to be hitting the junk yards soon. If anyone has the info please respond directly to me and keep it off of the 62 to 65 board. Thanks Dennis C.
Whats the casting number? From: Dennis C. <dennis.2914@xxxxxxxxx> To: The 1962 to 1965 Mopar Mail List Clubhouse <1962to1965mopars@xxxxxxxxxxxxxxxx> Sent: Sunday, August 14, 2011 9:15 AM Subject: Mopar Related Head Question I have a 1991 318 in a Dakota with a cracked head. Anyone have the interchange data on what year heads I can use? I have been doing Google searches and it looks like 91 may be the year heads changed and the 318 went to roller cam. Going to be hitting the junk yards soon. If anyone has the info please respond directly to me and keep it off of the 62 to 65 board. Thanks Dennis C. -- -- Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! 1962 to 1965 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. -- You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group. http://groups.google.com/group/1962to1965mopars?hl=en.
I dropped them off at the machine shop and didn't get the casting number, I'll call him on Monday. Topic: Overheating Stumped...IDEAS
I used a 3 row with a hemi in a 65 dodge. Removed all paint. Paired with (STOVE BLACK PAINT). Used stock cast iron water neck. Thermostat was a mopar high flow. 2 Units of=)"water wetter" No anti-freeze. Removed electronic fans. Dropped 6 degrees. MoPar or No Car ________________________________ From: Richard Kinsley Sent: Saturday, August 13, 2011 9:08 PM To: 1962to1965mopars@xxxxxxxxxxxxxxxx Subject: Re: Overheating Stumped... I had and aftermarket, Mr Gasket, t-stat housing that was warped and caused my t-stat to freeze up partly open. It was a similar scenario and quickly escalated to incredible temps. I almost wrecked a new motor because of that chrome piece of s***. Might be a thought. I really wouldn't think the radiator should cause a negative effect like you're seeing. Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies ===================================================================================================================================== > You received this message because you are subscribed to the Google Groups > "The 1962 to 1965 Mopar Mail List Clubhouse" group. > http://groups.google.com/group/1962to1965mopars?hl=en. -- Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies -- -- Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! 1962 to 1965 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. -- You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group. http://groups.google.com/group/1962to1965mopars?hl=en. Topic: Overheating Stumped...
I had and aftermarket, Mr Gasket, t-stat housing that was warped and caused my t-stat to freeze up partly open. It was a similar scenario and quickly escalated to incredible temps. I almost wrecked a new motor because of that chrome piece of s***. Might be a thought. I really wouldn't think the radiator should cause a negative effect like you're seeing. Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies ===================================================================================================================================== -- Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies Topic: 440 heads
Thanks Dodger! that was exactly the formula I need and it is easy to use. I got my numbers together and plugged them into the calculator I was surprised to find that the stock 1978 440 engine came out to 8.85 : 1 Comp ratio I thought it was 6.2:1 Then I figgered it with the 516 closed chamber heads and it was 9.43:1 ratio Both were with .018 compressed steel head gasket. .. I think I will be real satisfied with that ratio. Thanks again!.......................MO -- -- Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! 1962 to 1965 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. -- You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group. http://groups.google.com/group/1962to1965mopars?hl=en. -- Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! 1962 to 1965 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. -- You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group. http://groups.google.com/group/1962to1965mopars?hl=en. |
Back to the Home of the Forward Look Network