Re: Manual Steering Box Seals Needed

["Dennis C." <dennis.2914@xxxxxxxxx>]

OK,

I had looked at Rock Auto for the seal and did not find anything.
After your message I went back and still did not find anything.

What am I doing wrong, did you find it with a search or did you call
them?

Thanks
Dennis C.

On Aug 16, 6:01 am, a440plus6 <a440pl...@xxxxxxxxx> wrote:
> Rock Auto
> 1 -Manual Steering Gear Pitman Shaft Seal-TIMKEN Part # 352560 Shaft Size:
> 1.125"; Housing Bore: 1.561"; Seal Width: 0.25"; Seal Outside Dia: 1.567";
> Seal Lip Material: Nitrile; Housing Material: Steel; Max Temp: 225°F; Min
> Temp: -40°F; Seal Type: 350; Press Fit- $3.96
>
> On Tue, Aug 16, 2011 at 6:59 AM, Mike & Deb <lefe...@xxxxxxxxxx> wrote:
>
>
>
> > Dennis,
> > Did you try Steer and Gear?
> > Mike LeFevre
>
> > On 8/16/2011 1:19 AM, Dennis C. wrote:
>
> >> Hello,
>
> >> I am looking for the oil seal for the pitman shaft of the manual box
> >> on my 63 Sport Fury.
>
> >> So far I have not found anything online and my local dealer does not
> >> have anything on older cars.  I have been to Motion Industries and San
> >> Diego Seal, they took measurements of the seal and the steering box
> >> and asked it it was metric?  I told them I realy doubted it by it
> >> could be a one-off seal design just for Mopar.
>
> >> So far nothing has been found yet.
>
> >> If anyone has had luck finding this seal I would appreciate the source
> >> and part number if possible.
>
> >> Thanks
> >> Dennis C.
>
> > --
> > --
> > Please address private mail -- mail of interest to only one person --
> > directly to that person. That is, send parts/car transactions and
> > negotiations as well as other personal messages only to the intended
> > recipient, not to the Clubhouse public address. This practice will protect
> > your privacy, reduce the total volume of mail and fine tune the content
> > signal to Mopar topic.  Thanks!
>
> > 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> >http://www.1962to1965mopar.**ornocar.org/mletiq.html<http://www.1962to1965mopar.ornocar.org/mletiq.html>and
> >http://www.1962to1965mopar.**ornocar.com/general_**disclaimer.html<http://www.1962to1965mopar.ornocar.com/general_disclaimer.html>
> > .
> > --
> > You received this message because you are subscribed to the Google Groups
> > "The 1962 to 1965 Mopar Mail List Clubhouse" group.
> >http://groups.google.com/**group/1962to1965mopars?hl=en<http://groups.google.com/group/1962to1965mopars?hl=en>
> > .- Hide quoted text -
>
> - Show quoted text -

-- 
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.