Re: What size socket for ball joints?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: What size socket for ball joints?



Either 2.125 in. or 1.906 in. diameter opening per
http://www.summitracing.com/search/Brand/SPC-Performance/Product-Line/SPC-Performance-Mopar-Ball-Joint-Sockets/?autoview=SKU

Gary H. 

>  -------Original Message-------
>  From: Eric R  
>  To: The 1962 to 1965 Mopar Mail List Clubhouse <1962to1965mopars@xxxxxxxxxxxxxxxx>
>  Subject: What size socket for ball joints?
>  Sent: Nov 04 '11 20:52
>  
>  I rented a ball joint kit for ONLY $190.00 from Advance Auto so I
>  could use the ball joint socket in it.  It seems to fit, but a little
>  loose.  I'm wondering what the actual socket size is and if anyone
>  knows where I could just buy the socket as it seems like a good thing
>  to have....  but not for $190.
>  
>  This is for a '62 Newport upper and lower.
>  
>  Thanks 

-- 
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.