Re: removing front windshield

["beckstein@xxxxxxxxxxx" <beckstein@xxxxxxxxxxx>]

Thanks!!

On Nov 15, 12:09 am, Ruth Gordon <kpmvn4...@xxxxxxxxx> wrote:
> I just went and looked at my 64 to get the order of removal for trim. First
> remove screws on the bottom interior trim piece at base of windshield, next
> go all around interior trim doing the same. On the exterior trim the fitst
> piece is the corner Y st top of roof pillar. Screws are under that lip
> toward inside of the car, as are the rest for the vertical pillar trim.
> After all that is removed, you're left with the long horizontal trim pieces
> that are at the top and bottom of the exterior windshield. FSM says to use
> a "fibre wedge". That's not described in any more detail!!! I guess
> carefully pry it off. THEN, FSM says to seperate the gasket (there is kinda
> ditch in the rubber to get into there) with a fibre tool and pry gasket
> apart by twisting motion , loosen at all inner and outer corners and have
> trusty assistant help in supporting the glass as you push it out! Since
> it's broken you may just want to get knife and slice all around glass
> gasket. New ones are ballpark $100+. Maybe lay a sheet or something on
> inside and out of car in case it shatters. Ruth
> On Mon, Nov 14, 2011 at 12:08 PM, beckst...@xxxxxxxxxxx <
>
>
>
> beckst...@xxxxxxxxxxx> wrote:
>
> > Hi Group,
>
> > The front windshield on my 64 Dodge 440 is cracked.
>
> > What is the procedure for removing the chrome trim, gasket and glass?
>
> > Thanks for your help
>
> > John Beckstein
> > 64 Dodge 440 4-door sedan
>
> > --
> > --
> > Please address private mail -- mail of interest to only one person --
> > directly to that person. That is, send parts/car transactions and
> > negotiations as well as other personal messages only to the intended
> > recipient, not to the Clubhouse public address. This practice will protect
> > your privacy, reduce the total volume of mail and fine tune the content
> > signal to Mopar topic.  Thanks!
>
> > 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> >http://www.1962to1965mopar.ornocar.org/mletiq.htmland
> >http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
> > --
> > You received this message because you are subscribed to the Google Groups
> > "The 1962 to 1965 Mopar Mail List Clubhouse" group.
> >http://groups.google.com/group/1962to1965mopars?hl=en.- Hide quoted text -
>
> - Show quoted text -

-- 
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.