Re: Convertible Top Installation

[Paul L <pjlenn@xxxxxxxxx>]

Don't know how appropriate this is to our Mopars but, I re-did the top
on my wife's VW convert.  I re-used the same top as it had just been
poorly installed by the previous owner.  I had a FSM for the top
installation but it was for an older year.  It also had 3 different
sets of measurements for bow spacing.  So I ended up measuring the
positions on the top and comparing them with the measurements in the
FSM and used the ones that were closest.  I don't know if your car
still has the old top installed but that is a good way to get the
spacing measurements.

Paul L.
63 Sport Fury
440/727

On Dec 8, 9:10 am, Kevin Merkley <krmer...@xxxxxxxxxxxx> wrote:
> Hi,
>
> Have any of you installed a convertible top on a 62-65 B body?
>
> I am thinking of doing the installation and want to know how difficult
> it really is.
>
> Anyone have any installation instructions I can read before deciding?
>
> Any tips or horror stories?
>
> Thanks,
>
> K.

-- 
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.