Re: How to tell if torque converter is mounted?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: How to tell if torque converter is mounted?
- From: Eric Sturgis <ericsturgis@xxxxxxxxx>
- Date: Thu, 15 Dec 2011 01:13:53 -0800
Ruth said something about this a while back. I remember by the feel of it, as you place the converter on the tranny is kind of double clunks as it slides on, the first clunk is where you are at now, you need the second clunk for it to go all the way on. Research Transmission in the archives, somebody got their cars transmission stuck on the converter trying to install the transmission w/o the converter seated all the way.
The instructions are in your book (mine book is a 1962 service man) starting on page 21-55 If you have the electronic copy of the 1964 service book it's on 21-61 under Transmission.
The converter should be seated 1/2" in from the outside edge of the bell housing to be seated correctly for installation. The Book will also tell you where the drain plug should be pointed....something about the little hole on the flex plate...but that's from memory...and that fails from time to time.
It's been 23 years since I took out a Chrysler Transmission. I remember being stuck, just like you are now. Boy it felt great when it went on all the way. I remember having to turn the converter around and around, on and off till I found the right spot to make it go. I didn't have that tool that it says in the book.
--
Eric
Tacoma, WA
1962 Chrysler Newport 2 door HT
--
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
Back to the Home of the Forward Look Network