Re: Engine Assembly Questions

[Bill M <y1topbanana73@xxxxxxxxx>]

Do I remember hearing old-timers using Vaseline for engine assembly?
Seems like it could be a bit too thick though.

Bill M
65 Coronet 500 'vert http://1962to1965mopar.ornocar.com/mmo62008.html
73 Dart Sport, 00 Cherokee Sport, 05 Ram 2500 CTD, 4WD, QC, LB, Laramie
21 Model T Depot Hack, 92 Accord, 06 Mazda 3

On Tue, Feb 14, 2012 at 7:42 AM, D J <djohn14296@xxxxxxxxx> wrote:
> I have always used STP for everything, never had a problem. A lot depends on
> how long it takes to assemble and how quickly you'll fire it up after
> finishing it. Some guys I know use straight 30 wgt. and fired it up to break
> it in as soon as they were finished and never had a problem.
>
> DJ
> From: Dennis C. <dennis.2914@xxxxxxxxx>
> To: The 1962 to 1965 Mopar Mail List Clubhouse
> <1962to1965mopars@xxxxxxxxxxxxxxxx>
> Sent: Tuesday, February 14, 2012 12:24 AM
> Subject: Engine Assembly Questions
>
> Hello,
>
> I'm going to be assembling an engine and I have a few simple
> questions:
>
> What is recommended for assembly lube on rods and mains?
>
> Any recommendations on using plastigage to check rod and main
> bearings?
>
> What is recommended for lubricating pistons when installing in the
> block?
>
> Just asking because it was a long time ago when I put my last engine
> together, lubricants have changed.
>
> This is Mopar related, it is a 1954 331 Hemi, don't want to make
> stupid mistakes.  I do have Tex Smith's "The Complete Chrysler Hemi
> Engine Manual", a very good book.
>
> Thanks.
> Dennis C.
>

-- 
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.