
Re: torque convertor question
    
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: torque convertor question
- From: "Bob Kinker" <robertkinker@xxxxxxx>
- Date: Sun, 29 Apr 2012 01:15:11 -0400
What is the intended usage?
BobK
----- Original Message ----- 
From: "Jack Cheek" <jcheek@xxxxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxxxxxxxx>
Sent: Saturday, April 28, 2012 11:50 PM
Subject: torque convertor question
welcome new member
question for you fine mopar folk..who would know what would be the best 
converter to use.
65 dodge 440 coronet convertible-440 bored .030. over with the max wedge top 
end-i put a push button set up in it with the 727-391 pos. rear end 275 60 
15 tires-rear ... .484 lift hydraulic cam 284 duration.1975 motor i think it 
has a steel crank--flat pistons i think compression is around 9.5-1.
thanks for your help.
thanks jack
----- Original Message -----
From: "Gary H." <62to65mopar@xxxxxxxxxxx>
To: 1962to1965mopars@xxxxxxxxxxxxxxxx
Sent: Saturday, April 28, 2012 7:52:21 PM
Subject: Welcome New Member - 1964 Dodge Polara
Welcome to the 1962 to 1965 Mopar Mail List Clubhouse to Jim!
Below is his introduction.
Thanks,
Gary H
=====
I own a 64 dodge polara 318 button, am starting to build motor, have done 
much other work, I have owned for 4 yrs. I am 64 and have owned a number of 
mopars. I think i'll hang on to this one. thanks Jim.
--
--
Please address private mail -- mail of interest to only one person --  
directly to that person. That is, send parts/car transactions and 
negotiations as well as other personal messages only to the intended 
recipient, not to the Clubhouse public address. This practice will protect 
your privacy, reduce the total volume of mail and fine tune the content 
signal to Mopar topic.  Thanks!
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and 
http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups 
"The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
--
--
Please address private mail -- mail of interest to only one person --  
directly to that person. That is, send parts/car transactions and 
negotiations as well as other personal messages only to the intended 
recipient, not to the Clubhouse public address. This practice will protect 
your privacy, reduce the total volume of mail and fine tune the content 
signal to Mopar topic.  Thanks!
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and 
http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups 
"The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en. 
--
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
 Back to the Home of the Forward Look Network
 Back to the Home of the Forward Look Network