Re: Installed Dual Master Cylinder

["Gary H." <62to65mopar@xxxxxxxxxxx>]

http://www.inlinetube.com/Prop%20Valves/pro_valves.htm has new proportioning valves if you don't have one already from a 1967 parts car. 

Gary H. 


>  -------Original Message-------

>  
>  NO.  You just need to get the correct proportioning valve, drum - drum,
>  disk - drum,  disk - disk.  Drum - drum in your case, the one from the 67
>  Coronet will work just fine!
>  
>  
>  Herb
>  


>  _-------Original Message-------_

>  The old single bowl master cylinder of death was leaking on my 65 Coronet
>  so I decided to upgrade to a dual one from a 67 Coronet.  Question is, the
>  metal block where the lines split front to back only has 1 line going to
>  the MC.  I am assuming there is a different block that would have 2 lines
>  out to the MC.  I did a google search but found only proportion valves but
>  as of now I am keeping it drum/drum and they are for disc/drum correct?

-- 
-- 
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.