--Noticed all the recent posts about the leaking trans, been working on a 64 Polara lately. The car's been sitting about a year, haven't had time to do much,. Fabricated the transmission mount, replaced the braided hose transmission lines that were on it when I bought it, replaced the header gaskets and seals, started the car and the trans was leaking from the torque converter area. Plulled the trans, replaced the seal and the bushing in the front pump, put everything back together and the front seal is still leaking. The trans didn't leak from the front seal area before I changed the braided lines, so I'm wondering if one of the lines is blocked and maybe causing pressure to cause it to leak? Any ideas?Thanks in advance,Tony
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/groups/opt_out.
Back to the Home of the Forward Look Network