Re: swapping from power to manual brakes
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: swapping from power to manual brakes



Jim,
 
Forgot about this one. Yes the mounting brackets are different for power and manual master cylinders if I remember do to the position of the pushrod. Just a little bit of time and you can modify your bracket to work. I think I enlarged the pushrod hole and maybe realigned the mounting holes, repaint and that was it.
 
Nick
 


From: "JimJablonski" <groovinjim@xxxxxxx>
Subject: Re: swapping from power to manual brakes

OK so I pulled the power brake booster this morning to do the coversion to manual brakes, and Doh! the bracket on the firewall is different for manual brakes.  I am guessing there is a one for manual brakes as it would seem a little shaky to just bolt the master cylinder to the firewall.

However, it looks like with a little fabrication I could cut up the power bracket and re-purpose it.  Before I do so, does anyone happen to have a bracket for manual brakes and / or are you wanting to convert from manual to power, so perhaps we could swap?  Or does anyone know where I might buy a new bracket for the manual brakes (doubtful) ?

Thank you,

Jim

On Monday, August 4, 2014 5:16:02 PM UTC-4, JimJablonski wrote:
Thank you, Nick!

Jim

On Monday, August 4, 2014 12:32:55 PM UTC-4, FuryUs63 wrote:
Jim,
 
Two more things to look for. On my '63 Fury I removed the power drum/drum brakes replacing them with manual disc/drum. First is the brake pedal which may have 2 holes for the pushrod. The lower hole is for power brakes, the upper is for manual brakes. Second is if you move the pushrod to the upper hole you'll have to adjust the brake light switch for proper contact with the brake pedal. The reason for moving the pushrod up is that manual brakes will need a little more leg muscle. Moving the pushrod up allows more lever action force. I used the Master Power Brake PR4722K adjustable pushrod.
 
Nick Tiberio
FuryUs63 
 


From: "JimJablonski" <groov...@xxxxxxx>
Subject: swapping from power to manual brakes

Team,

I am removing the power brake booster from my '64 Fury to enable going to manual brakes.  I believe the only to-do is to swap out the pushrod.  (I already converted to a dual reservoir system.)  I know Mancini and Mopar make adjustable pushrods.  Anyone have experience with these products? Or, even better, is anyone planning the opposite (going from manual to power) and interested in a wonderful deal on a never-been-used booster?  Hint, hint I want your manual pushrod...

Thank you,

Jim


 


 

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.

Attachment: mc1.JPG
Description: JPEG image

Attachment: mc2.JPG
Description: JPEG image



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.