Re: MSD 6AL-2 Installation Pointers Wanted

[Donald Gallimore <dongallimore@xxxxxxx>]

My initial thought was to mount in on the front of the radiator core support in front of the battery or the horns. Could pull out the glove box liner and put it there if the core support is judged to be too hot. There was a caution about putting it in the enclosed glove box but that might not apply to these newer digital units that should run cooler - case in point would be the 6+ you  have in the glove box..

My goal is to not put in non-factory holes in the car. Eventually, it is going back to be a  426W clone. 

 

Akron Don Gallimore

---

From: mike creglow <mcreglow@xxxxxxxxx>
To: "1962to1965mopars@xxxxxxxxxxxxxxxx" <1962to1965mopars@xxxxxxxxxxxxxxxx>
Sent: Wednesday, October 1, 2014 4:42 PM
Subject: Re: MSD 6AL-2 Installation Pointers Wanted

don,

try to mount it in a cool location.  in my race and street car i mounted my MSD ignition controller in the glove box.  i do not have a 6AL-2, but i have a digital 6+ in the race car and 6AL in my street car.

i think jim has the wiring covered.

mike

On Tue, Sep 30, 2014 at 7:36 PM, Donald Gallimore <dongallimore@xxxxxxx> wrote:

Putting in this unit this weekend. Looks pretty straight forward.

Any experiences out there for things to avoid/ do?

It's a '65 Belvedere with a 440 and Electronic ignition - Firecore Distributor and 7.5 mm ignition wires.

 

Akron Don Gallimore

-- 
-- 
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

--- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.