Here’s a pic of the Gates 19610 installed. It is more of a 90 than the OEM.
A cleaner install of the heater hose might be to use a 90 brass fitting and run the hose underneath the bypass hose. I believe LeRoar was or is like that.
From: Hall, Ricky L
Sent: Thursday, May 14, 2015 6:57 AM
To: 1962to1965mopars@xxxxxxxxxxxxxxxx; roland@xxxxxxxxxxxxxxxxx
Subject: RE: Poly waterpump bypass hose source???
For a 3/4” By-pass hose, 3/4” ID Gates 19610. Also you get two out of it – Roland posted this up a while back.
Been on vacation - Quite the trip – Grand Canyon – Bryce – Arches – Canyon lands etc - 3,700 miles – Sweet 80mph roads in Utah........ Set the cruise control for 85mph and make time, thanks to drivers that will actually stay to the right. Unlike our “oblivious left lane occupants” and 70mph roads in Washington state.
Now back to the Poly – Just about to add coolant and fire the rebuild for the first time......
From: 1962to1965mopars@xxxxxxxxxxxxxxxx [mailto:1962to1965mopars@xxxxxxxxxxxxxxxx] On Behalf Of 62to65mopar
Sent: Friday, May 08, 2015 6:15 AM
To: 1962to1965mopars@xxxxxxxxxxxxxxxx; roland@xxxxxxxxxxxxxxxxx
Subject: Re: Poly waterpump bypass hose source???
Here 'tis:
"Dayco 71218. Cut the long end to fit.
Bill M"
Thanks,
Gary H.
On Thursday, May 7, 2015 at 9:15:18 AM UTC-5, roland wrote:
I know we had it on the string here somewhere…but can’t find it… what’s the source for the 90 degree hose???
--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.
Back to the Home of the Forward Look Network