|
"Gary H." <62to65mopar@xxxxxxxxxxx>: Oct 13 01:12AM
Welcome to the 1962 to 1965 Mopar Mail List Clubhouse to Jason. Below is his introduction. Thanks, Gary H. ====== I own several Mopars. Current project is a 64 Polara 500 with a 440 and twin ...more |
|
zachross07@xxxxxxxxx: Oct 12 10:35AM -0700
I want to replace and upgrade all the lights in my dash... Anyone have any recommendations?? Thanks! 1964 dodge 880 Sent from my iPhone ...more |
|
<62-65-mail-list-club@xxxxxxxxxxx>: Oct 12 02:31PM -0500
Daniel at Daniel Stern Lighting posted these suggestions when he was a member of this group; he sells bulbs also. http://www.danielsternlighting.com/ He references 1965 but that applies to your 1964 ...more |
|
Dodger7998@xxxxxxx: Oct 12 01:45AM -0400
each wire has a specific job and needs to carry the amperage for it use, so need to know which wires are being replaced In a message dated 10/11/2015 7:13:52 P.M. Central Daylight Time, ...more |
|
Donald Gallimore <dongallimore@xxxxxxx>: Oct 12 10:40AM
The Factory Service Manual shows the wire gauge and color. Akron Don Gallimore From: Dodger7998 via The 1962 to 1965 Mopar Mail List Clubhouse <1962to1965mopars@xxxxxxxxxxxxxxxx> ...more |
|
zachross07@xxxxxxxxx: Oct 12 10:34AM -0700
Well... I fixed it... It was the ground coming off of the starter relay.... It's always the simplest solutions isn't it? Haha Now I have a new battery, relay, starter and ignition... ...more |
|
Bob <64ragtop@xxxxxxxxxxxxx>: Oct 12 12:46PM -0500
Congratulations, Zach! It seems many folks overcomplicate things - I know I have!!! You had a great learning experience and should have many happy hours (years!) of classic MOPARing. ...more |
|
"Hall, Ricky L" <ricky.l.hall@xxxxxxxxxx>: Oct 12 05:52PM
Could be many years – I have the “Starter Motor Installation Instructions” dated by Grandpa when he replaced the starter in the ’62 Dart wagon in June 1983.......... From: ...more |
|
"Roland Osborne" <roland@xxxxxxxxxxxxxxxxx>: Oct 12 08:03AM -0500
I've got a good one too... We built a 340 6-PAK for the magazine several years ago and since Edelbrock was a big supplier of parts we took it down to their plant for photo/story opp to dyno it... ...more |
|
Nico Over <nover2@xxxxxxxxxxx>: Oct 12 09:07AM -0500
to piggy back on Roland's comment, I drill a .050" hole in that plug to give a bit more oil on the distributor drive. (Old early hemi recommendation) Nico Over Va. Beach, Va. ...more |
|
JimJablonski <groovinjim@xxxxxxx>: Oct 12 06:22AM -0700
Hi Mo, I am running 215 / 70R15 tires on the front of my '64 Fury. My Center Line wheels have a 3.313 inch backspace. Fit great with no issues whatsoever. Not knowing your setup my sense ...more |
|
Cory Rempel <cory_383@xxxxxxxxxxx>: Oct 11 10:48PM -0600
Awesome!! Date: Sun, 11 Oct 2015 11:47:52 -0400 Subject: Spanked a Mustink Yesterday From: y1topbanana73@xxxxxxxxx To: 1962to1965mopars@xxxxxxxxxxxxxxxx Had a guy in a Mustink (~70 mph) ...more |
|
You received this digest because you're subscribed to updates for this group. You can change your settings on the group membership page. To unsubscribe from this group and stop receiving emails from it send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx. |
Back to the Home of the Forward Look Network