![](http://www.forwardlook.net/images/6265466x44.gif)
Re: 1964 4 speed changesy
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: 1964 4 speed changesy
- From: Ray Bell <raybell46@xxxxxxxxx>
- Date: Thu, 22 Dec 2016 00:04:56 -0800 (PST)
Different models of tail housings have different bearing sizes, different gearbox mount pads and different speedometer drive fitments. The speedometer drive has to match up with the placement of the worm drive on the shaft.
This means you need to get the tail housing and the mainshaft from the same model transmission, and to get the same mount pad you need them to come from the early ('65 to '68) sliding yoke models.
Ray
--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.
Back to the Home of the Forward Look Network