Re: aluminum case A-727 leaks
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: aluminum case A-727 leaks



hi all
when one sets for a few days the convertor will let the fluids go back in the trans. pan so if the cables have any plastic melted away that would be a leak--also the seal for passenger gear also the the speed omter cable- rear seal- front seal

my two cents.
thanks jack
63 polara 500 h.t.383
65 dodge cornet convertible   max wedge set up
66 belvedere 2 h.t. 318 factory  a/c 4 wheel disc.brakes cuise control

On Tue, May 23, 2017 at 11:13 PM, <62-65-mail-list-club@xxxxxxxxxxx> wrote:
Ricky asked "But seriously, how many seals are the in the aluminum case A-727?
My ’62 shifts fine, but drips – seriously thinking about taking it to Pat Blais just to replace all the seals if nothing
else......"

So maybe we can put together a list of common failure points on the PB 727 for leaks. Here are a couple to start:

* O-ring on the trans filler tube
* trans pan gasket

Others?

Thanks,
Gary H.







--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.