Re: Tire/Rim fit ?

["'John Althaus' via The 1962 to 1965 Mopar Mail List Clubhouse" <1962to1965mopars@xxxxxxxxxxxxxxxx>]

on my 64 Plymouth with the original housing ran 8.5 American Torq s with 275 /60 and had to bend a bit and keep the back up a bit, went to a Dana from a 68 B body (just a tad bit wider   .25 in I think) and had to go to the 8 wide as the off set isn't as great.  a friend with a 65 with a Dana could only use 275 / 60s  don't remember the wheel  (was not American)   I doubt you will get to the inner wheel well, problem will be the outer lip.

On Tuesday, January 1, 2019 at 10:32:53 AM UTC-6, Jay Rod. wrote:

On a stock 1965 Coronet 500, is it possible to fit/use a set of Torq thrust D wheels/tiers size 15x10 with out having to modifying the inner wheel wells, or is 15x8 the way to go.

Thanks,

Jay.

-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.