Re: Intake manifold results - dual plane vs single plane
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Intake manifold results - dual plane vs single plane



Hi to all on the thread, my original setup for street and strip, was Edelbrock Performer Dual Plane, 440 Source "Stealth" heads, Extreme Energy Cam-488/491, Holley 830 Carb.  Dyno'd @ 6000' altitude, was running the 1/4 @ 12.7's to 12,9's, 108 to 110 mph. I was doing alot of car shows, and was happy, then I started into Bracket Racing more than the shows. Was looking for some more performance and still be streetable. Bit the bullet and went with the Trick Flow Power Port Top End Kit. Results are very evident, picked up, on the Dyno, @ the wheels again, 129 HP, 88'lbs., 1/4 mile is now 11.6's to 11.7', 115 to 116 MPH., speed come at the top end. It still is a very streetable car, though it goes through the gas. Hope this gives some insight, glad I did the Kit.    

On Sunday, August 18, 2019 at 1:16:28 PM UTC-6, ga...@xxxxxxxxxxx wrote:
MML,
I am working off the webmail so hopefully this goes through and I can read any "replies" in the same webmail format.

Quesiton: Who was testing their Big Block at the strip with the dual plane Edelbrock vs. the Single plane (Akron Don?) and which manifold performed best; single or dual plane?  
This thread was probably posted about 3-4wks. ago and I have not been able to access the 62-65 List for ages.

Thank you!
Gary P.

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/1962to1965mopars/b26e09e0-30ba-4ca8-b373-f3483a553ea2%40googlegroups.com.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.