put grease on the ends of the fasteners, and place in the correct position
Jimmy
On 5/14/20, Wade's '62 Sport Fury wrote:
> My father-in-law is finishing up his 1962 Fury. It has donor front fenders
>
> not original to the car, which don't have the holes drilled for the wide
> piece of trim that goes along the top (see photos). We're trying to figure
>
> out exactly where to drill the holes....the trim piece is nice & straight
> and has all the studs, but it's a bit tricky to know where to drill since
> the trim would go down at a bit of an angle. We don't want to guess at it
> and then have it off kilter 1/8 of an inch, it needs to line up with the
> trim on the door.
>
> We thought perhaps the easiest way was to find someone with this same
> fender that would happen to be off the car, and have them trace a pattern
> they could send to us (anyone have one?) Otherwise, any advice on how best
>
> to go about making sure we accurately drill the holes would be appreciated.
>
> Thanks much - Wade
>
> --
> --
> --
> Please address private email -- email of interest to only one person --
> directly to that person. That is, email your parts/car transactions and
> negotiations, as well as other personal messages, only to the intended
> recipient. Do not just press "reply" and send your email to everyone using
> the general '62-'65 Clubhouse public email address. This practice will
> protect your privacy, reduce the total volume of mail and fine-tune the
> content signal to Mopar topic. Thanks!
>
> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html and
> http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
> --
> You received this message because you are subscribed to the Google Groups
> "The 1962 to 1965 Mopar Mail List Clubhouse" group.
> http://groups.google.com/group/1962to1965mopars?hl=en.
> ---
> You received this message because you are subscribed to the Google Groups
> "The 1962 to 1965 Mopar Mail List Clubhouse" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/1962to1965mopars/113190a0-1373-40b4-b499-cac26b346722%40googlegroups.com.
>
--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/1962to1965mopars/CAM-1tWxpeniyY2sYRRPpN8dhmZ3D2CeVKLffkqssNHvsCZwxnw%40mail.gmail.com.
-- 
