Vote for The Forward Look Network on the Mopar Top 100 Sites 

Rear ends, again...

From: Brian Cooper
Date: March 14, 2001


The truck I am building needs a 57.5" backing plate to backing plate rear after some much more careful measuring. Now the rear under the wagon is 56.5". I am sure it is not a posi, but what casting number should be on the pinion and where for an 8 3/4 rear. It seems to be the same thing I have in the truck now. If it ain't an 8 3/4, where should I look for a cheap-o 3.7 to 3.8 gear posi unit, like what year car or truck and what model. I'm sure this is yet another Daven quesiton.


Last changed: July 19, 2018