Vote for The Forward Look Network on the Mopar Top 100 Sites 

Re: LA distributor to Poly-curves

From: Adam Green
Remote Name:
Date: January 26, 2003
Time: 09:37:38


Chuck, there really is no "one size fits all" when it comes to distibutor curves. Imagine it to be a bit like bolting on a new carb or converter straight out of the box. It will probably work but not be at the optimum. If you can find a proper distributor shop, they should be able to recurve your new dizzy to suit the engine. They take into account, compression ratio, cam etc to give you the best curve. I'm pretty sure that Hank or Daven have already said that if you modify a part (or whatever) from the factory settings, then all bets are off as to what will work best with it. Good luck with the conversion. Adam


Last changed: July 19, 2018