Vote for The Forward Look Network on the Mopar Top 100 Sites 


Re: Master Cylinder Emergency!

From: John Z
Email: Fins59@charter.net
Remote Name: 68.115.13.235
Date: September 07, 2003

Comments

It so happens I was just working on one about an hour ago. That rod is probably just stuck in there. If you removed that plate held by 2 screws it should come out. Take a small punch and insert if thru the opposite end where brake line connects and gently tap with a hammer and the rod and insides (spring, rubber cup, piston) of cylinder should pop out along with rod. Spray some lube in appropriate areas.

 


Last changed: March 03, 2024