Vote for The Forward Look Network on the Mopar Top 100 Sites 

Re: U joints on a 300G

From: Steve Hobby
Remote Name:
Date: January 25, 2004


The Ball and Trunion is really quite simple. The kits are available from Kantor Auto Parts in Boonton NJ Ask for john Wetangle. Tell him HOBBY sent you. Anyway, the two hardest parts of the job are the boot and the ball shaft. The shaft has to be pressed out. If it's in good shape, like mine was, leave it. You'll have to manipulate the new boot over the shaft and through the yoke colar. The operation should take an hour or less. Make sure you pack it real good with grease. Kantor 800-526-1096 John X375 Write me direct if I didn't answer your question correctly. Steve


Last changed: July 19, 2018