The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

55 exhaust suggestions
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Technical Discussions -> The Exhaust Pipe - Modification & PerformanceMessage format
 
Chessie6057
Posted 2018-09-30 10:47 AM (#570951)
Subject: 55 exhaust suggestions



Member

Posts: 30
25
Location: Iowa
Hey all,

Need to put new exhaust under my '55 Custom Royal Lancer with 270 Hemi, and dual exhaust. Any suggestions for an exhaust that will sound throaty, but not obnoxiously loud? I have been searching on YouTube to hear exhaust sound, the flow master sounds OK to me, but my muffler guy hates those. I would like to go Stainless, so any other suggestions out there?

Thanks for your time and input
Top of the page Bottom of the page
57chizler
Posted 2018-09-30 12:33 PM (#570960 - in reply to #570951)
Subject: RE: 55 exhaust suggestions



Expert

Posts: 3768
200010005001001002525
Location: NorCal
Every Flowmaster I've tried sounded OK from the outside but had an irritating drone inside the car.
Top of the page Bottom of the page
Mopar1
Posted 2018-09-30 1:03 PM (#570963 - in reply to #570960)
Subject: Re: 55 exhaust suggestions



Expert

Posts: 3027
2000100025
Location: N.W. Fla.
turbo mufflers..
Top of the page Bottom of the page
56D500boy
Posted 2018-09-30 2:23 PM (#570966 - in reply to #570951)
Subject: RE: 55 exhaust suggestions



Expert 5K+

Posts: 9855
5000200020005001001001002525
Location: Lower Mainland BC
Chessie6057 - 2018-09-30 10:47 AM
Need to put new exhaust under my '55 Custom Royal Lancer with 270 Hemi, and dual exhaust. Any suggestions for an exhaust that will sound throaty, but not obnoxiously loud? I have been searching on YouTube to hear exhaust sound, the flow master sounds OK to me, but my muffler guy hates those. I would like to go Stainless, so any other suggestions out there?


I asked a similar question for my 315 D500 hemi and I got responses like "Not Flowmaster", "Waldrons" (complete system), etc

REFERENCE: http://www.forwardlook.net/forums/forums/thread-view.asp?tid=63711&...

In the end, I went with my local muffler shop for about CDN$500 for a custom, down pipe back, system. Details: Went with 2.25" pipes once the OE down pipes from the manifold went horizontal. AP XLERATOR BIG MAX® TURBO MUFFLERS and Magnaflow 35190 tips.

All that said, if I was to do it over again, I might have gone with this system off eBay (for US$385 plus US$65 shipping) because the bends look less restrictive than the "custom" job I got:

https://www.ebay.ca/itm/1956-DODGE-CORONET-ROYAL-CUSTOM-ROYAL-DUAL-E...



My car:



Edited by 56D500boy 2018-09-30 3:12 PM




(DForgies56CRD500Sept14_2017_4.jpg)



Attachments
----------------
Attachments DForgies56CRD500Sept14_2017_4.jpg (224KB - 466 downloads)
Top of the page Bottom of the page
Chessie6057
Posted 2018-09-30 4:20 PM (#570973 - in reply to #570951)
Subject: Re: 55 exhaust suggestions



Member

Posts: 30
25
Location: Iowa
Thanks for the suggestions! 56 D500 Boy, how did the sound turn of your exhaust turn out?

Top of the page Bottom of the page
CrAzYMoPaRGuY
Posted 2018-10-03 4:01 PM (#571108 - in reply to #570951)
Subject: Re: 55 exhaust suggestions


Veteran

Posts: 154
1002525
Location: Locked in my Canadian garage....
I used Dynomax Super Turbos on the last car I did. Headers, 2 1/2, no crossover, out the back, stock small block. Actually sounds decent.
I dont mind the 50 series Flowmasters, the 40s are a little on the aggressive side IMO.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)