The Forward Look Network | ||
| ||
Dave's 58 Imperial 4 dr hdtp Jump to page : 1 2 Now viewing page 2 [50 messages per page] | View previous thread :: View next thread |
Forward Look NON-Technical Discussions -> Members Rides | Message format |
macedon |
| ||
Elite Veteran Posts: 963 Location: San Antonio, TX | Yesterday was just one of those days. I ended up having to take the dash out. I was hoping to avoid that but decided that it needed to be done. There had been some wiring issues in the past and some iffy repairs. So I just decided to bite the bullet. Not really what I would term a fun job. After I got it out I was pretty much annoyed and pissed off. Had to walk away. So today I got a nice surprise. This was inside the dash. Yep, no kidding. All I can figure is it fell off and they stuck it up on the dash and somehow it fell in? Not really sure, but happy to have it. (58emblem.JPG) Attachments ---------------- 58emblem.JPG (98KB - 365 downloads) | ||
KcImperial |
| ||
Expert Posts: 2490 Location: Kansas City, KS | pulling the dash and iffy wiring repairs?? how bad could that be? (sorry, I feel your pain) that emblem is a huge bonus!! while the dash is out, you might want to double check the wires and function of the neutral start and reverse light switch on the back of the push buttons. I had to solder some connections on mine. (dash.jpg) Attachments ---------------- dash.jpg (159KB - 366 downloads) | ||
58dodgecrl |
| ||
Member Posts: 23 | A while ago, I tried to find the thread and I couldn't, you asked if anyone had the small plastic trunk crest that they could scan to make a sticker from. I checked mine at the time and it was missing. However, I have no idea how it got there (but not complaining), I found mine in the glove compartment. Do you still need this? I think it's a great idea to scan it and upload it here, but my only problem is I don't own a scanner. Do you know if places like OfficeMax let you scan things, even if a fee? I'm glad I'm not the only one in the situation, I have to pull the dash from my Imperial, too. I've never done it before, is there any advice you can give, or what order to go? | ||
macedon |
| ||
Elite Veteran Posts: 963 Location: San Antonio, TX | I'm sure a cellphone picture would work. They have gotten to be pretty hi-res now. As far as pulling the dash it depends how far you want to go. Since I'm painting this car the windshield is out. I also pulled the steering wheel and dropped the column. Made life easier that way. | ||
macedon |
| ||
Elite Veteran Posts: 963 Location: San Antonio, TX | Not perfect, but meets my needs. (horn ring.JPG) Attachments ---------------- horn ring.JPG (280KB - 375 downloads) | ||
KcImperial |
| ||
Expert Posts: 2490 Location: Kansas City, KS | Very nice horn pad! Those are hard to find without major shrinkage at the ends or cracked down the middle of the vinyl. Saw an Instagram post of someone starting to reproduce the horn pads in the Scandinavian region, never heard if they finalized them Bonus fact for fun - 57-59 Imperials all had their own, year specific designs for horn pads | ||
macedon |
| ||
Elite Veteran Posts: 963 Location: San Antonio, TX | I used flex agent in the blue paint. Seems to work. Hopefully stand up over time. | ||
macedon |
| ||
Elite Veteran Posts: 963 Location: San Antonio, TX | Glovebox restored (glovebox.JPG) Attachments ---------------- glovebox.JPG (138KB - 328 downloads) | ||
KcImperial |
| ||
Expert Posts: 2490 Location: Kansas City, KS | Looks great, the vinyl really pops! Don't forget the proper OEM, half-unlatched alignment when you install the door | ||
macedon |
| ||
Elite Veteran Posts: 963 Location: San Antonio, TX | Thanks. Mostly just cleaned and polished. Gold enamel mixed with clear coat over polished crown. Took my best pad and sprayed with base coat paint with flex agent added. Then SEM matte clear coat. Then treated with Eastwood vinyl treatment. | ||
macedon |
| ||
Elite Veteran Posts: 963 Location: San Antonio, TX | Clean and polish. Lot's of shiny bits on an Imperial (shine.JPG) Attachments ---------------- shine.JPG (135KB - 332 downloads) | ||
macedon |
| ||
Elite Veteran Posts: 963 Location: San Antonio, TX | Finally. After many delays I'm finally getting to sand and paint the body. (body.JPG) Attachments ---------------- body.JPG (77KB - 242 downloads) | ||
Evil Jim |
| ||
Member Posts: 9 Location: Central Texas | Macedon, you have a rare Custom Imperial for sure. Manual windows, Auto Pilot and rear air conditioning. I have a 58 Custom Imperial. I haven't yet taken the door panels off to adjust the handle linkage in fear breaking something irreplaceable. By comparison, I've got a hangnail and you've gone Doctor Frankenstein. Good luck. | ||
Evil Jim |
| ||
Member Posts: 9 Location: Central Texas | My bad. I mistook your donor car with manual windows as your project car. Again, good luck with your project. | ||
macedon |
| ||
Elite Veteran Posts: 963 Location: San Antonio, TX | Few spots of filler over some old whiskey dents. Not bad really. (sand1.JPG) (sand2.JPG) (sand3.JPG) (sand4.JPG) Attachments ---------------- sand1.JPG (147KB - 242 downloads) sand2.JPG (65KB - 250 downloads) sand3.JPG (101KB - 244 downloads) sand4.JPG (102KB - 246 downloads) | ||
macedon |
| ||
Elite Veteran Posts: 963 Location: San Antonio, TX | Progress. (prime1.JPG) (prime2.JPG) (prime3.JPG) Attachments ---------------- prime1.JPG (116KB - 233 downloads) prime2.JPG (125KB - 238 downloads) prime3.JPG (167KB - 231 downloads) | ||
wizard |
| ||
Board Moderator & Exner Expert 10K+ Posts: 13042 Location: Southern Sweden - Sturkö island | It's coming along just fine Dave, keep up the good work and keep us posted. | ||
macedon |
| ||
Elite Veteran Posts: 963 Location: San Antonio, TX | Bodywork is done. Two coats of primer and block sanding. Another coat of primer today. Hope to shoot color later next week. (2ndprime1.JPG) (2prime2.JPG) Attachments ---------------- 2ndprime1.JPG (72KB - 240 downloads) 2prime2.JPG (66KB - 228 downloads) | ||
mikes2nd |
| ||
Expert 5K+ Posts: 5006 | once the paint is on, all downhill... still alot of work but downhill | ||
macedon |
| ||
Elite Veteran Posts: 963 Location: San Antonio, TX | Progress (bluewhite.JPG) Attachments ---------------- bluewhite.JPG (43KB - 225 downloads) | ||
57burb |
| ||
Expert Posts: 3966 Location: DFW, TX | Awesome work, Dave! It is looking amazing. | ||
macedon |
| ||
Elite Veteran Posts: 963 Location: San Antonio, TX | Progress (color1.JPG) (color2.JPG) (color3.JPG) Attachments ---------------- color1.JPG (65KB - 211 downloads) color2.JPG (60KB - 230 downloads) color3.JPG (81KB - 226 downloads) | ||
macedon |
| ||
Elite Veteran Posts: 963 Location: San Antonio, TX | Now all I have to do is put it back together. Hah, yeah... that's all. (blueroof.JPG) (blueroof2.JPG) (blueroof3.JPG) (backhome.JPG) Attachments ---------------- blueroof.JPG (170KB - 227 downloads) blueroof2.JPG (212KB - 220 downloads) blueroof3.JPG (176KB - 218 downloads) backhome.JPG (49KB - 224 downloads) | ||
macedon |
| ||
Elite Veteran Posts: 963 Location: San Antonio, TX | Been a while... put these on today. (tailcrop.JPG) Attachments ---------------- tailcrop.JPG (66KB - 159 downloads) | ||
macedon |
| ||
Elite Veteran Posts: 963 Location: San Antonio, TX | A few more (ring.JPG) Attachments ---------------- ring.JPG (86KB - 168 downloads) | ||
macedon |
| ||
Elite Veteran Posts: 963 Location: San Antonio, TX | The trim ring for the Imperial Flitesweep decklid didn't hold up well since water collected at the bottom. Most of them are pretty ate up with corrosion and pitting. So until I find a nice one this will have to do. I had a broken one and the one that came with this car. Stitched them together. I think it looks presentable. (stitch.JPG) (ends.JPG) (jbweld.JPG) Attachments ---------------- stitch.JPG (43KB - 149 downloads) ends.JPG (43KB - 163 downloads) jbweld.JPG (81KB - 163 downloads) | ||
Phil_the_frenchie |
| ||
Elite Veteran Posts: 915 Location: Pau, S-W France | Do you have the small clear plastic hose which is connected to a tiny hole at the bottom of the hollow under the ring ? This hose (maybe 30 cm long ?) runs on the underside of the deck lid and emerges under the trunk handle ! I saw that on a '58 Crown and I was very amazed Edited by Phil_the_frenchie 2021-11-27 4:01 PM | ||
macedon |
| ||
Elite Veteran Posts: 963 Location: San Antonio, TX | Been a while (impr.JPG) Attachments ---------------- impr.JPG (82KB - 123 downloads) | ||
macedon |
| ||
Elite Veteran Posts: 963 Location: San Antonio, TX | Doors. Yay! (doorsbackon.JPG) Attachments ---------------- doorsbackon.JPG (66KB - 115 downloads) | ||
57burb |
| ||
Expert Posts: 3966 Location: DFW, TX | This car is a work of art. Great job, Dave! (the idea to butt two half-good Flitesweep sections together was pure genius, btw) (impr.JPG) Attachments ---------------- impr.JPG (82KB - 119 downloads) | ||
60 dart |
| ||
Expert 5K+ Posts: 8947 Location: WHEELING,WV.>>>HOME OF WWVA | beautiful work ----------------------------------later | ||
macedon |
| ||
Elite Veteran Posts: 963 Location: San Antonio, TX | Mudflap restore. I'm sure the correct name is a more elegant Imperial worthy name, but I always just called it the mudflap. (mudflap1.JPG) (mudflap2.JPG) Attachments ---------------- mudflap1.JPG (182KB - 58 downloads) mudflap2.JPG (59KB - 57 downloads) | ||
macedon |
| ||
Elite Veteran Posts: 963 Location: San Antonio, TX | Installed (flap2.JPG) Attachments ---------------- flap2.JPG (74KB - 57 downloads) | ||
Jump to page : 1 2 Now viewing page 2 [50 messages per page] |
Search this forum Printer friendly version E-mail a link to this thread |
(Delete all cookies set by this site) | |