The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

New Pushrods for the 341 Hemi
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Technical Discussions -> Engine, Exhaust, Fuel and IgnitionMessage format
 
JGC403
Posted 2019-08-18 1:26 PM (#586189)
Subject: New Pushrods for the 341 Hemi


Member

Posts: 39
25
Location: GREENEVILLE, TN
Its funny sometimes what your grand father decide to save a couple of dollars on when rebuilding a motor. When my dad and my grandfather put the Hemi together, my grandfather decided to re-use the original pushrods. Well now that we are trying to get this back on the road, we have a lifter tick. So I need new pushrods. I don't really like adjustable pushrods, I have one adjustable pushrod for checking lengths, then was going to order a set of correct length pushrods. I don't know what the machine shop did with the block so that is why I want to check the lengths. How much pre-load did the factory have for the hydraulic lifters on the early Hemi?
Top of the page Bottom of the page
Mopar1
Posted 2019-08-18 1:54 PM (#586192 - in reply to #586189)
Subject: Re: New Pushrods for the 341 Hemi



Expert

Posts: 2731
200050010010025
Location: N.W. Fla.
With hyd lifters the OEM push rods should be OK unless there's noticeable wear. Could be just a lifter needs replacing. The early 361-413 (812 for most makers) work fine. Contact "wayfarer" here on the Board about push rod availability, he's QEC.
Top of the page Bottom of the page
mobileparts
Posted 2019-08-18 10:15 PM (#586213 - in reply to #586189)
Subject: Re: New Pushrods for the 341 Hemi


Veteran

Posts: 171
1002525
When you figure out what you want , let me know ....
Maybe you want 16 valve lifters and 16 push rods and BE HAPPY....
I also have one (1) remaining N.O.S. all U.S.A. made ++ FEL PRO ++
One year - One Motor 1957 DeSoto 341 Full Set of Gaskets....

Always best to simply call me -- Craig -- 516 - 485 - 1935....
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread



(Delete all cookies set by this site)