The Forward Look Network | ||
| ||
Photoshop request Jump to page : 1 Now viewing page 1 [50 messages per page] | View previous thread :: View next thread |
Forward Look NON-Technical Discussions -> 1955-1961 Forward Look MoPar General Discussion | Message format |
jboymechanic |
| ||
Expert Posts: 2196 Location: Muskego, WI | Can anyone photo shop the front end of a '61 Plymouth onto the body of a 1960 Plymouth 2 door sedan? | ||
mikes2nd |
| ||
Expert 5K+ Posts: 5006 | no and you should be flogged in the center of town! | ||
60 Imp |
| ||
Location: North Australia | Hahahaha, Mike, you are a crack -up. Would you prefer a different front, maybe a GM? Steve. (tumblr_cd42c27658c3746cecdf323f1019da30_47985114_400.jpg) Attachments ---------------- tumblr_cd42c27658c3746cecdf323f1019da30_47985114_400.jpg (45KB - 176 downloads) | ||
Powerflite |
| ||
Expert 5K+ Posts: 9604 Location: So. Cal | This photoshop swap isn't easy without access to the two cars so that you can get the same angle on it. If the angle is off, it will look screwy. Also it helps if the cars are of similar shade. Anyway, so the best I can do is this unless you can provide some much better pictures to go off of. (60-61Plymouth.jpg) Attachments ---------------- 60-61Plymouth.jpg (65KB - 167 downloads) | ||
mikes2nd |
| ||
Expert 5K+ Posts: 5006 | that wont work | ||
jboymechanic |
| ||
Expert Posts: 2196 Location: Muskego, WI | Thanks Nathan, that was fun, but I think we all agree on no. Thanks for helping me scratch that itch. | ||
sermey |
| ||
Expert Posts: 1208 Location: SWITZERLAND | Here an attempt to color up. Antenna removed. Unfortunately original at very low pixel! - SERGE - Edited by sermey 2020-10-02 5:23 AM (60-61 Plymouth Colored.jpg) Attachments ---------------- 60-61 Plymouth Colored.jpg (137KB - 163 downloads) | ||
jboymechanic |
| ||
Expert Posts: 2196 Location: Muskego, WI | Pretty good Serge, but I still don't think I'd want to build one. | ||
mikes2nd |
| ||
Expert 5K+ Posts: 5006 | no not at all... | ||
57plymouth |
| ||
Expert Posts: 3577 Location: Blythewood, SC | That's awful. But you have the cars, do what you want. I'd hate to mess up a good 1960 with ugly 1961 parts. | ||
Suddenlyits1960! |
| ||
Extreme Veteran Posts: 403 Location: California | 60 Imp - 2020-09-30 5:07 PM Hahahaha, Mike, you are a crack -up. Would you prefer a different front, maybe a GM? Steve. Those stupid looking Rolls Royce hoods and decklids that people used to throw on those bugs in the 70’s looked just about as stupid as this. | ||
Suddenlyits1960! |
| ||
Extreme Veteran Posts: 403 Location: California | While I would agree that the 61 definetly should have had fins from the factory,and looks 100 per cent better with them,the front end side sculpting of the 61 tenders don’t flow into the body of the 60 as “powerflite”s photoshop mock up shows. I still have no idea why all the other 1961 Chrysler makes had fins except the Plymouth. It’s just a big flat downward sweeping surface. | ||
John Serkaian |
| ||
Regular Posts: 62 Location: Novi, Michigan | The bulging ridge on the fenders of the 61 Plymouth look like styling add-ons that don't blend with the rest of the body of any Forward Look Mopar. I'd like to shave them off and tuck the headlights closer together with headlight bezels of the 1963 Chrysler. Anyone care to attempt what that would look like? It seems like a manageable enough mild customization that couldn't hurt the already bizarre face of the 61. (I might even attempt it as I restore my 61 Fury.) Maybe swapping the front end with one from the 1962-64 Dodge 880 would be the "cleanest" approach for a 60- 61 Plymouth? | ||
Space Trukin Wagon |
| ||
Extreme Veteran Posts: 425 Location: Ohio | John Serkaian - 2020-10-09 1:11 AM The bulging ridge on the fenders of the 61 Plymouth look like styling add-ons that don't blend with the rest of the body of any Forward Look Mopar. Maybe swapping the front end with one from the 1962-64 Dodge 880 would be the "cleanest" approach for a 60- 61 Plymouth? Swapping a 62 Dodge 880 fender onto the 60-61 Plymouth probably have the same “bulge” bodyline problem. Since, the fender used on the 1962 Dodge 880 models is a carry over of the same design used on the 61 Dodge. Which in my opinion is what messes up the look of the 1961 dodge, especially on the polara models as the front to rear bodyline / moldings are “mis-aligned”. This is not as evident on the Phoenix / Seneca models. Anyway the front fenders from a 63-64 Dodge 880 would be the ones that are smooth and possibly look cool swapped onto a 60-61 Plymouth. Edited by Space Trukin Wagon 2020-10-09 9:05 AM | ||
normsclassicradio |
| ||
Veteran Posts: 298 Location: Kalispell, MT USA | Here are a couple of 64 880 photos.. (small 64 dodge flip.jpg) (small at work.jpg) Attachments ---------------- small 64 dodge flip.jpg (49KB - 162 downloads) small at work.jpg (83KB - 164 downloads) | ||
Jump to page : 1 Now viewing page 1 [50 messages per page] |
Search this forum Printer friendly version E-mail a link to this thread |
(Delete all cookies set by this site) | |