RE: IML: RE;IML; 1967 Impereial wire wheels

["Dick Benjamin" <dickb@xxxxxxxxx>]

Wire wheels were not offered for these cars.  If you want to put them on
your car, you need to match not only the bolt circle and wheel width, but
the offset and the clearance hole for the hub, and be sure they will clear
the brake calipers.   

You must also be prepared for people like me, who will be appalled at the
idea (but I'm an old fuddy duddy about originality)!

Dick Benjamin

-----Original Message-----
From: mailing-list-owner@xxxxxxxxxxxxxxxx
[mailto:mailing-list-owner@xxxxxxxxxxxxxxxx] On Behalf Of Edward Tiede
Sent: Thursday, February 03, 2005 10:13 AM
To: mailing-list@xxxxxxxxxxxxxxxx; Rob_Mopar@xxxxxxxxxxx
Subject: IML: RE;IML; 1967 Impereial wire wheels

Hi All

     Need information on wire wheels for a '67 Crown convertible with the 
Budd disc brake system. According to the FSM the wheels size is 15 x 6JK 
which is a 15 inch wheel with 9/16" studs on a 5 bolt 5" stud bolt circle.
    Any information will be of great help.

Thanks
Ed Tiede/'67 convertible




-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm






-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm