driver side window

[Mark and Lillian Pappas <lillyvine@xxxxxxxxxxxxx>]

      the information that I mentioned before was for the rear window 
motor and I do apologize , The front door motor mounting is different 
.there is three bolts holding the motor to the plate on the front door . 
the third bolt ,if the window is in the up position , hides behind the 
large moon shaped gear , what I did in the past is unbolt the plate and 
shift it to one side and remove the motor from the plate . the front 
door motors on a two door are a lot easier to take out then the ones in 
the rear quater. sorry for the mis info I will be more careful in the 
future.