sounds like the frame broke?
>From: "Kevin Pacheco" <kevin50187@xxxxxxxxxxx>
>
>Its not the torson bar hitting the floor, its the metal part thats hooked
>to the torson bar (going from one side to the other, just behind the
>tranny) this part moves up and down, but not together, the left side and
>right side hit at different times, depends on the bump.
>
>This is the best that i can explane this problem, i might be able to take
>pictures of the part thats hitting the floor, ive looked under the car
>while it was moving and spotted the problem, now fixing its a whole other
>story.
>kevin 71 IMP
>
>
>
>
>
>>From: "jsadowski" <jsadowski@xxxxxxx>
>>Reply-To: mailing-list@xxxxxxxxxxxxxxxx
>>To: <mailing-list@xxxxxxxxxxxxxxxx>
>>Subject: Re: IML: torson bars hitting floor board
>>Date: Tue, 31 Dec 2002 17:54:13 -0700
>>
>>Are you sure its not something like the exhaust system loose & hitting the
>>floor? If the torsion bar was snapped off, one side of the car would be
>>leaning & bounce easily.
>>John
>> ----- Original Message -----
>> From: Kevin Pacheco
>> To: mailing-list@xxxxxxxxxxxxxxxx
>> Sent: Tuesday, December 31, 2002 5:24 PM
>> Subject: IML: torson bars hitting floor board
>>
>>
>> every bum i go over it sounds like something is hitting the floorboard,
>>i
>> found out that the torson bars that go from the front towards the back
>>of
>> the car, and the bars hook to a piece of metal, thats free for movment,
>> the
>> pice is at the end of the torson bars, and when you hit a bump this how
>>pice
>> moves up and down, and it moves up far enough to hit the metal abouve
>>it,
>> this noise was not here before, how do I go about fixing this sound?
>>
>> Kevin 71 IMPERAIL
_________________________________________________________________
The new MSN 8: smart spam protection and 2 months FREE*
http://join.msn.com/?page=features/junkmail
Back to the Home of the Forward Look Network