bulb replacement

[ViaJoaquin@xxxxxxx]

Very carefully! The bezel actually snaps onto the lense and the lens is screwed 
to the backing which holds the socket. 
There are three spring prongs on the bezel, put all the fingertips from one 
hand on the lens and gently try to get your fingers under the bezel once one 
clip lets go, it will come off, but be careful, the lens is very brittle! Once 
the bezel is off it is simply a matter of removing the two phillips screws to 
get at the bulb. When reinstalling the bezel, note that that it only goes on 
one way because the prongs are not equally spaced.

Roy
67 Crown FDHT 

In a message dated 3/18/2003 3:56:26 PM Eastern Standard Time, "kwdata" 
<kw.data@xxxxxxxxxxx> writes:

>How do you get the lens and mount off for the C-pillar light without tearing
>the fabric or breaking the lens?
>
>Marc
>
>'67 Crown Coupe
>
>
>
>-----------------  http://www.imperialclub.com  -----------------
>This message was sent to you by the Imperial Mailing List. Please 
>reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
>shared with everyone. Private messages (and attachments) for the
>Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
>To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
>
>