The transmission fluid is type A and from what I
understand it was a w10w motor oil too. Ask a trans
man that has been around along time.RC
--- Jim Martin <jcmartin@xxxxxxxxx> wrote: >
Correct me if I am wrong. In 1953, the
> transmission used with fluid
> drive uses
> non-detergent 10W motor oil.
> In 1953 the Powerflite automatic Transmission
> uses automatic
> transmission fluid. (Type unknown)
>
> Jim
>
>
>
>
>
> ATTACHMENT part 2 message/rfc822
> From: "jsadowski" <jsadowski@xxxxxxx>
> To: <mailing-list@xxxxxxxxxxxxxxxx>
> Subject: Re: IML: 1953 imperial
> Date: Sun, 1 Jun 2003 18:53:44 -0700
>
> The is a person that advertises in the WPC
> newsletter with 10W non-detergent oil for Chrysler
> transmissions. The add doesn't say what year range
> this is used on. He is getting $15.00 for 2 quarts
> which includes the shipping cost.
> John
> ----- Original Message -----
> From: roger crabtree
> To: mailing-list@xxxxxxxxxxxxxxxx
> Sent: Sunday, June 01, 2003 5:59 PM
> Subject: Re: IML: 1953 imperial
>
>
> If your trans fluid is clear it is what they
> called a
> type c fluid. I had the same in my 55 and it is
> compatable with the Dextron varieties. Mine had a
> screeen rather than a filter thank god. Changed
> the
> oil and it was fine. Trans fluid in the power
> steerring i'm not sure about. does it go off the
> back
> of the generator? I use clear power steering
> fluid i
> mine and the filters are the same as the 58 ford
> power
> steeing units and can be bought at Galleys
> Filters.
> RC good luck
>
>
>
>
> aptden30@xxxxxxx wrote: > this 53 imperial i own
> has
> one of the first
> > automatic transmissions chrysler
> > put in their cars. i got a 53 owners manual but
> i
> > guess it is for one of the
> > earlier production models because it only talks
> > about the fluid drive. i need
> > to know what type of trans fluid it should use?
> > also, can synthetic oil be used
> > in the hemi engine? what type of power steering
> > fluid, the same as the
> > trans.? i am having the power brake booster
> rebuilt
> > and if anyone knows the proper
> > way to bleed it and the rest of the system when
> it
> > is re-installed i would
> > appreciate that info. thanks dennis
> >
> >
> > ----------------- http://www.imperialclub.com
> > -----------------
> > This message was sent to you by the Imperial
> Mailing
> > List. Please
> > reply to mailing-list@xxxxxxxxxxxxxxxx and your
> > response will be
> > shared with everyone. Private messages (and
> > attachments) for the
> > Administrators should be sent to
> > webmaster@xxxxxxxxxxxxxxxx
> > To UN-SUBSCRIBE, go to
> > http://imperialclub.com/unsubscribe.htm
> >
>
> =====
>
>
> http://mobile.yahoo.com.au - Yahoo! Mobile
> - Check & compose your email via SMS on your
> Telstra or Vodafone mobile.
>
>
> ----------------- http://www.imperialclub.com
> -----------------
> This message was sent to you by the Imperial
> Mailing List. Please
> reply to mailing-list@xxxxxxxxxxxxxxxx and your
> response will be
> shared with everyone. Private messages (and
> attachments) for the
> Administrators should be sent to
> webmaster@xxxxxxxxxxxxxxxx
> To UN-SUBSCRIBE, go to
> http://imperialclub.com/unsubscribe.htm
>
>
=====
http://mobile.yahoo.com.au - Yahoo! Mobile
- Check & compose your email via SMS on your Telstra or Vodafone mobile.