Re: IML: 1990 Imperial ABS Retrofit

[Brad Hogg <roadhogg@xxxxxxx>]

That's good to know, Mark!  At $555.00, that kit is very affordable.  I'd
love to install one on my KImperial.  This is a "load leveling" system
rather than a full blown "air ride" system as it employs a hybrid of
conventional springs and air bags to help level the load.  This would be a
very interesting project to tackle!


Please quote this message in your reply.  Otherwise I will be unable to
reply to your message.  Thanks.



----- Original Message ----- 
From: "Mark Swingle" <mark.swingle@xxxxxxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Wednesday, December 08, 2004 5:49 AM
Subject: RE: IML: 1990 Imperial ABS Retrofit


I too used a Dynasty for parts.  I found a 90 since my Imperil was  90, but
they are all similar most likely.  For new parts you can use:
http://www.strutmasters.com/chrysler/index.htm

But they are expensive as previously mentioned.
Mark
90 Imperial



-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm