IML: Polishing plastic Was: '66 Imperial Tail Lens

["Dick Benjamin" <dickb@xxxxxxxxx>]

Meguire's makes a plastic polish (I believe it is #9) that is fantastic!  If
you can push hard and have a lot of stamina, you can restore a plastic
part's outer surface to brand new looking.  Just follow the directions, and
eat your Wheaties that morning.  Do NOT use any kind of a motorized tool,
you will burn the plastic (and please don't ask how I know that!)

Dick Benjamin

-----Original Message-----
From: mailing-list-owner@xxxxxxxxxxxxxxxx
[mailto:mailing-list-owner@xxxxxxxxxxxxxxxx] On Behalf Of Jon Ricketson
Sent: Wednesday, February 23, 2005 7:12 AM
To: mailing-list@xxxxxxxxxxxxxxxx
Subject: Re: IML: '66 Imperial Tail Lens

Thanks.  Good advise.  I have cleaned them inside and out.  Any suggestions 
on how to polish them?  Is there a particular method, tool, wax, coating, 
etc. that is recommended?  I've used lots of elbow grease, soap and water 
but they are still very dull.
Jon





-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm