Re: IML: Ignition failure 2
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: IML: Ignition failure 2



>From: Kenyon Wills <imperialist1960@xxxxxxxxx>
>Subject: Re: IML: Ignition failure II
>
>I had the distributor cap off and the rotor seemed to
>have excessive play, not that I know what that would
>be.  If you described the circle that the outer edge
>of the rotor makes, the rotor pivots back and forth
>about 2-3cm Seems sloppy to me.  I have not put a
>timing light on it to see if the spark timing is
>jumping around.  Plan to do so, right?

   In my '62 I bent the distributor shaft once - the car wouldn't stay in
tune at all that way.
     -Kle.




-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.