Re: IML: 73 AutoTemp Success!!

["mike and cindy" <mbecker30@xxxxxxxxxxx>]

Might I suggest  while the troubleshooting process is fresh in your mind, 
you could
write a trouble shooting flow chart  for the ATC system and others could add 
to it where they have expertise and put it up on the IML for us less 
knowledgeable folks. mike Becker

---- Original Message ----- 
From: "Brad Hogg" <luxoliner@xxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Sunday, May 01, 2005 1:31 PM
Subject: Re: IML: 73 AutoTemp Success!!


> This is a perfect example of how much easier it is to diagnose and repair
> and ATC system than it is to rip it out and convert it to manual AC.
> Congratulations Jerry!  Job well done!
>
> ----- Original Message ----- 
> From: <jhplc@xxxxxxxxxxx>
> To: <mailing-list@xxxxxxxxxxxxxxxx>
> Sent: Sunday, May 01, 2005 2:43 PM
> Subject: IML: 73 AutoTemp Success!!
>
>
> After reinstalling the servo, I checked the underhood blower wiring, and 
> the
> green wire connector was melted on the inside..A new connector, and there 
> is
> blower..one speed on Hi-Auto, Def and Hi-Def..(none on Lo-Auto), air comes
> out of the defroster and dash vents..Next to check is the blower motor
> resistor..the linkage adjustment, and a new servo..
>
> Jerry
> 73
>
>
>
> -----------------  http://www.imperialclub.com  -----------------
> This message was sent to you by the Imperial Mailing List. Please
> reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
> shared with everyone. Private messages (and attachments) for the
> Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
> To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm



-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm