Re: IML: 63 air conditioning

[<rymals@xxxxxxxxxxxxx>]

Contact Old Air Products in Texas - They are the experts. I rebuild centerlinks (relay rods / draglinks.
> 
> From: "John and D'Ann" <jdfahnestock@xxxxxxxxxxxxx>
> Date: 2005/05/06 Fri PM 12:37:07 GMT
> To: <mailing-list@xxxxxxxxxxxxxxxx>
> Subject: IML: 63 air conditioning
> 
>     My air conditioning compressor locked up two years ago.  I have finally been able to get a re-built compressor, clutch, hoses, and receiver/dryer.  I need some advice on flushing out the remaining parts of the system.  The instructions on the new compressor say that the expansion valve and the mufflers should NOT be flushed with solvent, does this sound correct?  I can understand why not the valve, but I would think the mufflers should be.  I see that there are some special flushing tools, but they are fairly expensive for what will probably be a one time use for me.  Is it good enough to put solvent in and blow it out with air?  Can I do this with the evaporator and condenser in the car or do they really need to come out to do it right?
> 
>     I also am thinking of using AUTOFROST (R-406) instead of 134.  Has anyone had experience using 406 in their Imperials?
> 
> Thanks,
>     John
> 



-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm