Re: IML: 82 Imp
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: IML: 82 Imp



That brings up one more thing, Dick.  Do those little spring loaded valves disassemble further than just the O ring?  Like do the springs come out?   
 
On Thu, 12 May 2005 20:53:36 -0700 "Dick Benjamin" <dickb@xxxxxxxxx> writes:

From: mailing-list-owner@xxxxxxxxxxxxxxxx [mailto:mailing-list-owner@xxxxxxxxxxxxxxxx] On Behalf Of Ken W Stephenson
Sent: Thursday, May 12, 2005 10:54 AM
To: mailing-list@xxxxxxxxxxxxxxxx
Subject: Re: IML: 82 Imp

 

One more thing, Dick.  On cleaning the nozzles, the web page alludes to back flushing.  How does one do that?  Unsolder the end plug?

 

 

That’s a new one on me, Ken.  I just squirt “Gunk” carburetor cleaner through the plumbing until I get a good stream out of each of the 8 nozzles.   It’s quick and easy, but you do have to lift the nozzle assembly out of the HSA so you can disassemble the little spring loaded regulator valves.  Do this in a clean, well lit place!


Dick.

 

 

 


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.