Re: IML: 90 Imperial Radio

["Daniel C Topping" <topdog@xxxxxxxxxxxxxxxx>]

I do not have the wiring diagram for your stereo deck, but usually the amp 
wire is a trigger wire that remotely turns on a self contained amp or amps 
that you have installed somewhere in the sound system when ever the stereo 
deck is powered up. That is all I know.

DCT
----- Original Message ----- 
From: "Ryan S" <sign_in_name_20@xxxxxxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Wednesday, August 31, 2005 1:47 PM
Subject: IML: 90 Imperial Radio


> I had posted here a while ago about putting my new deck into my 1990 
> Imperial.
>
> So I found that each sub has its own amp, so there is 8 speakers (4 
> tweeters and 4 subs), all factory equipmnt except the deck. Now there is 
> one wire, "AMP" i assume it gives power to all the amps. OK, i hooked it 
> up today, and when I use the radio the subs work, BUT when i try and play 
> a CD, nothing happens.......
>
> How can I get the one wire to work?? This wire SHOULD go to the 'remote 
> lead' wire on the deck, and I put it there, but I get nothing. So how do I 
> go about getting sound to the subs?
>
>
>
>
> -----------------  http://www.imperialclub.com  -----------------
> This message was sent to you by the Imperial Mailing List. Please reply to 
> mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with 
> everyone. Private messages (and attachments) for the
> Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
> To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm




-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm