According to the 1966 Mopar MPC, a 66 Imperial with A/C uses vacuum control #2096084. While the B- and C-bodies use a different p/n switch, the lowly Dart and Valiant use the exact same number part as the Imperial. This p/n has probably been updated several times so who knows what the current number is. Aren't these vacuum controls available from NAPA? I got an NOS one for my 70 LeBaron (wth AutoTemp) from Central Motor Parts in NJ. Less than $50 IIRC. Pete in PA From: "Jon Ricketson" <jcricketson@xxxxxxxxxxx> Subject: IML: I "Fixed" the Fan but BROKE the Switch! Date: Sun, 18 Sep 2005 17:36:30 -0400 So, today I worked on my '66 Crown Coupe and, while trying to figure out why my heater/AC fan would not run, I figured out that the switch with the 5 buttons in it was faulty. This part is pretty complex - with several vacuum hoses plugged into it, and 4 or 5 electrical wires attached to it. The push buttons were engaging the vacuum switches correctly and were turning the AC Compresser Clutch on and off correctly, but were NOT sending any power to the fan via the fan speed switch. The fan speed switch is working fine so I know the problem is in the 5 button switch. I confirmed this by doing some continuity testing with an ohm meter. Spraying lots of electrical cleaner into the small openings in the switch provided inconsistent results. Anyway, connecting one of the wires to the hot lead on the switch resulted in the fan running always - even when the OFF button is pushed. And the fan speed switch works. For now, I can live with this. At least I now get heat and AC!! ----------------- http://www.imperialclub.com ----------------- This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm