Re: IML: Repairing emblems
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: IML: Repairing emblems



Use double coated scotch tape that the body shop use one the modern cars.
Good luck,
Lupe
64 Crown Coupe
----- Original Message ----- From: "Ron M" <rfm10@xxxxxxxxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Friday, September 23, 2005 7:28 AM
Subject: IML: Repairing emblems



What is the best way to repair the script emblems on both my 50 Windsor and 68 Imperial? On the Windsor one of the "Windsor" emblems is broken so the "r" hangs down. On the Imperial the emblem is fine but the pegs on the back that attach it to the car are either broken or corroded off.

Will an epoxy such as JB Weld work or is it better to solder them? All opinions and suggestions are greatly appreciated.

Thanks,

Ron

68 Imperial Convertable
50 Windsor Sedan

--
There are no stupid questions, just a lot of
very curious idiots.






----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm




----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm




Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.