|
Bob / IML list
I have just completed the replacement of the Door Hinge stops
on my 1964-2 door coupe. I bought two stop kits, which includes the stop pins
& spring,
from Lowell Howe in Paterson Ca. 209-892-3464. You need to
remove the whole upper hinge assembly from the door. I used a transmission
jack with a platform & side braces I manufactured, to support the door
while removing the hinge. The door IS HEAVY! I then
rolled the jack back enough to get clearance to remove the top hinge
assembly. I ground off the old hinge pins with a die grinder & punched them
out. I put the new pins in & penned the ends over to prevent them from
coming out. The hardest part is putting the new spring on. I used a large pair
of channel lock pliers & brute strength. The hinge
MUST be held securely in a bench vise while doing this.
As an alternative to a Transmission jack one could make a platform for a floor
jack but you will need an assistant to help you balance the door. Its so nice
not having the door hit you in the chins while you are getting in and out.
If anyone needs further information contact me off list & I will be glad to
provide it.
George
1964 Crown Coupe
1964 LeBaron
|
Back to the Home of the Forward Look Network