IML: Further on the Unleaded gas effects discussion of last month
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

IML: Further on the Unleaded gas effects discussion of last month



A couple of people asked about valve seat modifications to combat valve
recession.   Here are a couple of pictures of the heads for my 68 after
inserting the hardened valve seats in the exhaust valves.  All the valves
are new and shiny here, so the seats are a little hard to see, but if you
look closely at the exhaust valves (the smaller valves), you'll see a bright
ring around them; these are the inserts.

I apologize for the black paint - I promise I will paint them the right
color before I install them!

Dick Benjamin

Http://users.sdccu.net/dickb/68heads1.jpg

Http://users.sdccu.net/dickb/68heads2.jpg




-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.