Re: IML: Seat belts on 1955 in Sweden
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: IML: Seat belts on 1955 in Sweden
- From: Jeff Cantor <jcantor791@xxxxxxxxxxx>
- Date: Sun, 25 Jun 2006 21:55:43 -0400
Paul,
As you know, I have a 56 Sedan which I believe is reasonably similar
to the 55. One of the very first things I did when I got the car in
'03 was to add seatbelts to all six seating positions as I do drive
the car with some frequency. I purchased belts from The Andover
Companies via their website (http://www.andoauto.com). The belts
were of excellent quality and the installation hardware and
instructions were very good and easy to follow. In short, it simply
requires drilling some holes into the floorboards behind the front
seat and installing the appropriate hardware (the belts are available
with some options which are detailed very well on the website).
Fortunately I haven't had the occasion to find out if they really
work and hope I never do.
Jeff
'56 Sedan
Trenton, NJ
Date: Sun, 25 Jun 2006 20:20:50 -0400
From: randalpark@xxxxxxx
Subject: IML: Fwd: Seat belts ??? and Updates on 1955 Imperial in Sweden
Reply-To: mailing-list@xxxxxxxxxxxxxxxx
----------MailBlocks_8C866CD832B76C4_18B4_7EB5_FWM-D04.sysops.aol.com
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
Everyone, Rickard and Anna would like some input from everyone about
installing seat belts in their '55 Imperial Sedan. I have forwarded
their note for you all to read below. They are unable to post to the
list directly, but are members of the IML and our Imperial Owner
Family just the same. Please give them as much help as you can.
Thanks!!!
Paul W.
-----Original Message-----
From: Rickard & Anna <imperial55coupe@xxxxxxxx>
To: randalpark@xxxxxxx
Sent: Sun, 25 Jun 2006 21:51:53 +0200 (CEST)
Subject: Seat belts to 1955 Imperial
Dear Paul,
Long time no see.
I hope you're doing ok, I see and read lots of your responses at the
IML but as
you
know we can't write back to the list from this e-mail address...
I have a question which I wonder if you would like to help us post to
the IML.
We'we been thinking of putting seat belts into our car but so far we
just
thought
about it. However, only a couple of weeks ago a married couple we
know of were
in a
terrible accident with their vintage Plymouth. They were hit in the
side by a
car
not respecting a stop sign and the woman was thrown out of the car
getting
serious
head fractures.
This made us decide to put seat belts into our car but we would for
sure want
some
tips on where to get them and how to install them in the best way.
Any other
people
on the IML who has done this? What companies could we use as a
source? How
should we
install the front ones? Any comments would be highly appreciated!
----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
Back to the Home of the Forward Look Network