RE: IML: Cooling Issues
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: IML: Cooling Issues



Yes, but the car is 42 years old now.

Have you tried any of the "water wetter" products? Redline makes one as does Royal Purple (Purple Ice). These work by improving the contact of the water/coolant with the surfaces it interacts with. If you have corrosion in your engine block or radiator, the water to metal contact will be less than ideal. These water wetters increase the contact and thus increase the heat transfer. Thus the engine will transfer heat better to the coolant and the coolant will transfer heat better to the radiator.  

I have used the Redline product in several vehicles and it works. These will cause no damage and for less than $10 may help quite a bit.

----- Original Message -----
From: "Brooks Harkey"
To: mailing-list@xxxxxxxxxxxxxxxx
Subject: RE: IML: Cooling Issues
Date: Mon, 10 Jul 2006 22:06:20 -0500

It wasn’t like this in 1964 when it was new, so it should not be like this now.  How’s your fan shroud?

 

 

-----Original Message-----
From: mailing-list-owner@xxxxxxxxxxxxxxxx [mailto:mailing-list-owner@xxxxxxxxxxxxxxxx] On Behalf Of JAY D'ANGELO
Sent: Friday, July 07, 2006 8:50 PM
To: mailing-list
Subject: IML: Cooling Issues

 

Here in Las Vegas, the summer temperatures routinely reach 115 degrees.  When I drive my 64 convertible, I usually don't have any problems.  The temp gauge will go to 3/4 and pretty much stay there.  This is wtithout the AC on.

However, if I do some real slow driving, like bumper to bumper strip cruising or in a parade (which I do a few times a year), it pegs out and the car starts pinging until I can get some air flow going.  I don't have the AC on in this condition, obviously.

Everything has been rebuilt under the hood, including the engine, the water pump and radiator.  I just redid the AC compressor and attendant parts and at freeway speeds there is no issue.

Around town is what concerns me.  I want to install an aux. electric fan(s).  The smallest I can find is 10 inches with a housing dimension of 11.5 X 12 X 2.  The center nose support brace prohibits anything larger and I was thinking of putting two 1250 cfm fans on.  But, it will be tight in the space allowed on the front of the AC condenser (22" wide).

Each fan will draw about 5 amps.  I'm told the standard alternator is only putting out around 60 amps and the ten more would likely create a problem.  NAPA suggested a higher power alternator and a change in the voltage regulator.

I was unable to find anything related to my issue on the website.  Anyone with suggestions to help me?

Thanks

Jay D'Angelo
64 Iml Cvt
Las Vegas


Express yourself instantly with Windows Live Messenger


--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.394 / Virus Database: 268.9.10/383 - Release Date: 7/7/2006


--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.394 / Virus Database: 268.9.10/383 - Release Date: 7/7/2006



Fred Joslin



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.