Re: IML: 93 brakes

[Brad Hogg <luxoliner@xxxxxxx>]

You get the following Dynasty parts...

Vacuum brake booster
master cylinder
two lengths of stock brake line to run from booster to proportioning valve
proportioning valve
brake pedal (if you have the Bendix brakes and I think you do but confirm)

I bought my booster new as I don't trust a used booster.  I bought 
everything else from a salvage yard.  I think I spent about $200 on parts.

The very very worst part of this project is flaring the old brake lines to 
fit into the new proportioning valve.  You will need to get the proper 
fittings etc to work with the valve as not all the ports are the same size. 
This is not hard, it's just the only part of this whole project that isn't a 
"bolt in" solution.  When you get the proportioning valve from the salvage 
yard, pay attention to which ports go where so you can duplicate that.

It's all detailed here...
http://www.imperialclub.com/Yr/1990/Repair/ABS/index.html

Email me if you have more detailed questions.

----- Original Message ----- 
From: "Yvonne Bowhay" <moongardenart@xxxxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Saturday, September 16, 2006 8:00 AM
Subject: IML: 93 brakes


Hello
   Oh do tell...how do I fix the problem? I go today to get a part I would 
like it to be the right one.          thanks Yvonne & Mike



-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm